AccessGUDID - DEVICE: BENCO (00366975002808)

GUDID

Device Identifier (DI) Information

Brand Name: BENCO
Version or Model: 2428-320
Commercial Distribution Status: In Commercial Distribution
Catalog Number:
Company Name: BENCO DENTAL SUPPLY CO.

Primary DI Number: 00366975002808
Issuing Agency: GS1
Commercial Distribution End Date:
Device Count: 1
Labeler D-U-N-S® Number*: 015108087 *Terms of Use

Device Description: GALAXY ACRY PWD SHADE-99 SC 5#

Device Characteristics

What MRI safety information does the labeling contain?	Labeling does not contain MRI Safety Information
Device required to be labeled as containing natural rubber latex or dry natural rubber (21 CFR 801.437):	No
Device labeled as "Not made with natural rubber latex":	No
For Single-Use:	Yes
Prescription Use (Rx):	Yes
Over the Counter (OTC):	No
Kit:	No
Combination Product:	No
Human Cell, Tissue or Cellular or Tissue-Based Product (HCT/P):	No

GMDN

[?]

GMDN Names and Definitions: © Copyright GMDN Agency 2015. Reproduced with Permission from the GMDN Agency.

GMDN Preferred Term Name	GMDN Definition
Dental appliance fabrication material, cured	A resin that polymerizes under heat (heat-cured), light (light-cured), and/or after a period of time (self-cured) intended to be used in the dental laboratory to manufacture a patient-worn dental appliance (e.g., denture base, occlusal splint/night guard); it may in addition be intended to fabricate non-patient-worn devices (e.g., drilling templates using 3-D printing). It consists of a reactive component (e.g., acrylic monomer, reactive polymer) that hardens via polymerization [or vulcanization]. Reinforcing fillers may be included in the resin to increase its strength and/or durability. After application, this material cannot be refabricated.

GMDN Preferred Term Name

GMDN Definition

Dental appliance fabrication material, cured

A resin that polymerizes under heat (heat-cured), light (light-cured), and/or after a period of time (self-cured) intended to be used in the dental laboratory to manufacture a patient-worn dental appliance (e.g., denture base, occlusal splint/night guard); it may in addition be intended to fabricate non-patient-worn devices (e.g., drilling templates using 3-D printing). It consists of a reactive component (e.g., acrylic monomer, reactive polymer) that hardens via polymerization [or vulcanization]. Reinforcing fillers may be included in the resin to increase its strength and/or durability. After application, this material cannot be refabricated.

FDA Product Code

[?]

Product Code	Product Code Name
EBI	Resin, Denture, Relining, Repairing, Rebasing

FDA Premarket Submission

FDA Premarket Submission Number [?]	Supplement Number [?]
Premarket Submission Number Not Available/Not Released

Device Exempt from Premarket Submission: No CLOSE

Sterilization

Device Packaged as Sterile: No
Requires Sterilization Prior to Use: No

Sterilization Method [?]
No Sterilization Methods Found

Storage and Handling

[?]

Storage and Handling
Storage Environment Temperature: between 16 and 26 Degrees Celsius

Clinically Relevant Size

[?]

Size Type Text
Weight: 5 Pound

Device Record Status

Public Device Record Key: 29ac3390-b06b-4de2-84b2-6e369747d10d
Public Version Date: July 06, 2018
Public Version Number: 3
DI Record Publish Date: September 23, 2016