DEVICE: Curaplex (00810071631948)
Notice: Any discrepancies with this record compared to the label?
If so, send a picture of the label to
GUDIDSupport@fda.hhs.gov.
Device Identifier (DI) Information
Curaplex
670236-KIT
In Commercial Distribution
670236-KIT
BOUND TREE MEDICAL, LLC
670236-KIT
In Commercial Distribution
670236-KIT
BOUND TREE MEDICAL, LLC
CPAP/Capno Kit O2 Max 3-Set with Chemetron Connector, Adult Medium Mask, Guard Filter
Device Characteristics
| Labeling does not contain MRI Safety Information | |
| No | |
| No | |
| Yes | |
| Yes | |
| No | |
| Yes | |
| No | |
| No |
GMDN
[?]GMDN© Term Code, Names and Definitions (*Terms of Use): GMDN® is a registered trademark of The GMDN Agency. All rights reserved. Used under licence from The GMDN Agency Ltd.
| GMDN Term Code | GMDN Term Name | GMDN Term Definition | GMDN Term Status [?] | Implantable? |
|---|---|---|---|---|
| 63171 | CPAP/BPAP unit ambient air filter, single-use |
A non-sterile filter designed to be installed in a continuous positive airway pressure (CPAP) and/or bi-level positive airway pressure (BPAP) unit to filter particulates from the ambient air prior to inhalation; it is not intended to filter medical gases. It is typically a flat sheet or pad composed of tightly woven materials or foam intended to be installed over the air inlet of the CPAP/BPAP device to remove particulates/impurities; it is not intended to filter microbes. This is a single-use device.
|
Active | false |
| 37591 | CPAP/BPAP nasal mask, single-use |
A non-sterile, flexible, form-shaped device designed to be placed over a user's nose to interface with a continuous positive airway pressure (CPAP) or bi-level positive airway pressure (BPAP) unit to provide the respiratory tract with direct ambient air, or medical oxygen (O2) and air, at a higher pressure than ambient air for noninvasive positive pressure ventilation (NPPV). It is typically made of plastic and/or silicone materials that create an airtight seal around the nose. It is available in various designs and sizes and stabilized with a headstrap. This is a single-patient device that may be reapplied to the patient over a short term (single-use) before being discarded.
|
Active | false |
FDA Product Code
[?]| Product Code | Product Code Name |
|---|---|
| BYE | Attachment, breathing, positive end expiratory pressure |
FDA Premarket Submission
| FDA Premarket Submission Number [?] | Supplement Number [?] |
|---|---|
| Premarket Submission Number Not Available/Not Released | |
Sterilization
Storage and Handling
[?]| Storage and Handling |
|---|
| No storage/handling found |
Clinically Relevant Size
[?]| Size Type Text |
|---|
| No Device Sizes |
Device Record Status
4ec84daa-e1fb-4dbe-8fbf-76dec4056c01
October 08, 2021
1
September 30, 2021
October 08, 2021
1
September 30, 2021
Alternative and Additional Identifiers Additional Identifiers
Package DI
[?]| Package DI Number | Quantity per Package | Contains DI Package | Package Discontinue Date | Package Status | Package Type |
|---|---|---|---|---|---|
| No Package DIs found | |||||
Secondary DI
[?]| Issuing Agency [?] | Secondary DI Number |
|---|---|
| No Secondary DIs found | |
Unit of Use DI
[?]
Unit of Use DI Number:
No Unit of Use DI Numbers Found
CLOSE
Direct Marking (DM)
[?]Production Identifier(s) in UDI
[?]Customer Contact
[?]
No Customer Contact currently defined