DEVICE: Glenoid IRI Barrel (00811813020013)

A hand-held surgical instrument intended to be used during implantation of an orthopaedic prosthesis, either manually or as a computer-assisted surgery (CAS) device, to aid in the navigation/placement of the prosthesis or other instruments [e.g., drill sleeves and guide wires (Kirschner wires), patella saw guide]. It may be used for the following applications: 1) to hold/align/fix/guide other instruments, prostheses, or prosthesis components; 2) to provide relative position landmarks; 3) to ascertain correct spatial orientation or limb alignment; and/or 4) as an interface (non-adaptive) between prosthesis components. This is a reusable device intended to be sterilized prior to use.

A non-sterile, noninvasive tool designed to support assembly of the component parts of an orthopaedic implant or surgical instrument during an orthopaedic surgical procedure, typically when component sizes are determined during the procedure [e.g., stem, neck, and head femoral components of a total hip arthroplasty (THA)]. It is available in one of a variety of forms (e.g., holder, clamp/press), however it is not a component of the final instrument/implant and is not a surgical screwdriver or wrench. This is a reusable device intended to be sterilized prior to use.

A non-sterile cylindrical device intended to temporarily hold one or more orthopaedic pin(s) [e.g., K-wires] during sterilization and a surgical procedure for protection against damage. It is made of metal (e.g., stainless steel) and is typically a cylinder with a screw top, with lateral fenestrations to enable the penetration of sterilization fluid. This is a reusable device.