DEVICE: TriMAX Implant System (00815432027569)

A surgical, jig-like device designed as a preshaped block with a defined pattern of prefabricated holes used to guide other instruments [e.g., drill sleeves and guide wires (Kirschner wires)] and/or to align a corresponding implant (e.g., a fixation plate) during an orthopaedic procedure. It is typically made of metallic or synthetic materials and may have an attachment point for an implant. This is a reusable device.

A sterile surgical, jig-like device designed as a preshaped block with a defined pattern of prefabricated holes used to guide other instruments [e.g., drill sleeves and guide wires (Kirschner wires)] and/or to align a corresponding implant (e.g., a fixation plate) during an orthopaedic procedure. It is typically made of metallic or synthetic materials and may have an attachment point for an implant. This is a single-use device.

A surgical instrument that is designed as an elongated, tapered and serrated cutting tool intended for shaping and enlarging holes in bone tissue. This is a reusable device.

A manual surgical device designed to simultaneously place, angle, and guide a rotating surgical drill on hard tissue (e.g., bone); some types are also intended for guiding bone-coring instruments (e.g., keel punch). It is designed in a tubular form or with guiding holes and may have serrations at its distal end to enable firm placement on hard tissue surfaces (it is not bored into the tissue); it can have a handle or be held by another device (e.g., orthopaedic jig), and typically allows protection of the surrounding soft tissue during surgery. It is typically made of metal and may have graduations along its length; it is not custom-made for a specific patient. This is a reusable device.

A hand-held tubular surgical device designed to simultaneously place, angle, and guide a rotating surgical drill on hard tissue (e.g., bone), and to protect the surrounding soft tissue while the drill is in operation. It may have serrations at its distal end to enable firm placement on hard tissue surfaces (it is not bored into the tissue); it can have a handle at its proximal end for holding and manipulation, or it may be held by another device (e.g., orthopaedic jig). The device is typically dedicated to drill bit size, made of metal, and may have graduations along its length; it is not custom-made for a specific patient. This is a single-use device.