DEVICE: Carrier™ Delivery Catheter (00840303713487)
Device Identifier (DI) Information
Carrier™ Delivery Catheter
CR7071162
In Commercial Distribution
N/A
BALT USA LLC
CR7071162
In Commercial Distribution
N/A
BALT USA LLC
The Carrier™ Delivery Catheter is a single lumen, variable stiffness, composite catheter. The design facilitates the advancement of the catheter and is intended to assist the delivery of interventional devices in the peripheral and neurovasculature. The outer surface of the Carrier™ Delivery Catheter is coated with a hydrophilic coating to increase lubricity. The proximal end of the Carrier™ Delivery Catheter incorporates a luer fitting for the attachment of accessories. Two radiopaque markers at the distal end help to facilitate fluoroscopic visualization.
A Steam Shaping Mandrel and Peel-away Introducer Tube are included within the tray. The Carrier™ Delivery Catheter is provided sterile, non-pyrogenic, and is intended for single use only.
Device Characteristics
Labeling does not contain MRI Safety Information | |
No | |
No | |
Yes | |
Yes | |
No | |
No | |
No | |
No |
GMDN
[?]GMDN© Term Code, Names and Definitions (*Terms of Use): GMDN® is a registered trademark of The GMDN Agency. All rights reserved. Used under licence from The GMDN Agency Ltd.
GMDN Term Code | GMDN Term Name | GMDN Term Definition | GMDN Term Status [?] | Implantable? |
---|---|---|---|---|
17846 | Vascular guide-catheter, single-use |
A flexible tube intended to be used for the percutaneous transluminal passage and placement of a diagnostic/interventional catheter, lead (e.g., pacing lead, balloon dilatation catheter), needle or guidewire through its lumen(s), within the vascular system. It may be rigid or flexible, non-steerable or steerable, single or multiple lumen(s), and the distal section can have a variety of preformed shapes (e.g., straight, hockey stick). It is not intended solely for infusion, is not intended to access superselective small vessels, and does not include a transseptal needle. It may include a disposable percutaneous introduction set or shaft visualization electrodes. This is a single-use device.
|
Active | false |
FDA Product Code
[?]Product Code | Product Code Name |
---|---|
DQY | Catheter, Percutaneous |
QJP | Catheter, Percutaneous, Neurovasculature |
FDA Premarket Submission
FDA Premarket Submission Number [?] | Supplement Number [?] |
---|---|
K230609 | 000 |
Sterilization
Storage and Handling
[?]Storage and Handling |
---|
Special Storage Condition, Specify: Avoid exposure to water, sunlight, extreme temperatures, and high humidity during storage. Store the Carrier Delivery Catheter in a cool, dry place under controlled room temperature. |
Clinically Relevant Size
[?]Size Type Text |
---|
Catheter Length: 162 Centimeter |
Device Record Status
fe5a1e91-5299-44f4-88e9-c043343218eb
April 10, 2025
1
April 02, 2025
April 10, 2025
1
April 02, 2025
Alternative and Additional Identifiers Additional Identifiers
Package DI
[?]Package DI Number | Quantity per Package | Contains DI Package | Package Discontinue Date | Package Status | Package Type |
---|---|---|---|---|---|
No Package DIs found |
Secondary DI
[?]Issuing Agency [?] | Secondary DI Number |
---|---|
No Secondary DIs found |
Unit of Use DI
[?]
Unit of Use DI Number:
No Unit of Use DI Numbers Found
CLOSE
Direct Marking (DM)
[?]Production Identifier(s) in UDI
[?]Customer Contact
[?]
1-949-788-1443
customerservice@balt-usa.com
customerservice@balt-usa.com