AccessGUDID - DEVICE: GalaFORM 3D (00855920006225)

GUDID

Device Identifier (DI) Information

Brand Name: GalaFORM 3D
Version or Model: 100043-01
Commercial Distribution Status: Not in Commercial Distribution
Catalog Number: FR3D01
Company Name: Tepha, Inc.

Primary DI Number: 00855920006225
Issuing Agency: GS1
Commercial Distribution End Date: September 25, 2020
Device Count: 1
Labeler D-U-N-S® Number*: 039856765 *Terms of Use

Device Description: GalaFORM 3D scaffold is a bioresorbable surgical mesh manufactured from poly-4-hydroxybutyrate (P4HB). P4HB is produced from a naturally occurring monomer and is processed into monofilament fibers and knitted into a surgical scaffold. The scaffold has a 3D curvature supported with a P4HB rim designed to promote better conformance with a patient's anatomy in locations in which a flat design does not easily conform. P4HB bioresorbs through a process of hydrolysis and hydrolytic enzymatic digestion. It has been developed to optimize resorption rate and prolong strength retention in order to provide support throughout the expected period of healing. Although the scaffold loses strength with time, its porous construction was designed to allow native tissue ingrowth and gradual transfer of load from the scaffold to the tissue. Pre-clinical implantation studies indicate that GalaFORM 3D scaffold retains approximately 70% of its strength at 12 weeks. Bioresorption of the scaffold material will be essentially complete within 18-24 months.

Device Characteristics

What MRI safety information does the labeling contain?	Labeling does not contain MRI Safety Information
Device required to be labeled as containing natural rubber latex or dry natural rubber (21 CFR 801.437):	No
Device labeled as "Not made with natural rubber latex":	No
For Single-Use:	Yes
Prescription Use (Rx):	Yes
Over the Counter (OTC):	No
Kit:	No
Combination Product:	No
Human Cell, Tissue or Cellular or Tissue-Based Product (HCT/P):	No

GMDN

[?]

GMDN Term Code	GMDN Term Name	GMDN Term Definition	GMDN Term Status [?]	Implantable?
44688	Extra-gynaecological surgical mesh, synthetic polymer, bioabsorbable	An implantable material (e.g., flat sheet) made from a bioabsorbable synthetic polymer(s) [e.g., polyglycolic acid (PGA), polycarbonate (PC), polyglycolide or carbon fibres] intended for extra-gynaecological, non-dental tissue repair/reinforcement application(s) [e.g., pericardial reinforcement, plastic surgery, abdominal hernia repair]. It may also be intended as a short-term scaffold for tissue regeneration. Disposable devices associated with implantation may be supplied with the mesh.	Active	true

FDA Product Code

[?]

Product Code	Product Code Name
OOD	Surgical Film

FDA Premarket Submission

FDA Premarket Submission Number [?]	Supplement Number [?]
K162922	000

Device Exempt from Premarket Submission: No CLOSE

Sterilization

Device Packaged as Sterile: Yes
Requires Sterilization Prior to Use: Yes

Sterilization Method [?]
Ethylene Oxide

Storage and Handling

[?]

Storage and Handling
No storage/handling found

Clinically Relevant Size

[?]

Size Type Text
Height: 5.3 Centimeter
Length: 15.5 Centimeter

Device Record Status

Public Device Record Key: fd9ae51d-ef22-4a3a-bac0-295e208c8254
Public Version Date: July 12, 2024
Public Version Number: 6
DI Record Publish Date: May 01, 2017