AccessGUDID - DEVICE: SeaSpine Bi-Ostetic Cancellous Block, 40x6x6mm (00858418003966)

GUDID

Device Identifier (DI) Information

Brand Name: SeaSpine Bi-Ostetic Cancellous Block, 40x6x6mm
Version or Model: SBiO-XYZ400606P
Commercial Distribution Status: In Commercial Distribution
Catalog Number: SBiO-XYZ400606P
Company Name: BERKELEY ADVANCED BIOMATERIALS, LLC

Primary DI Number: 00858418003966
Issuing Agency: GS1
Commercial Distribution End Date:
Device Count: 1
Labeler D-U-N-S® Number*: 081067703 *Terms of Use

Device Description: SeaSpine Bi-Ostetic Cancellous Blocks is a mixture with a nominal composition of 60% hydroxyapatite and 40% beta-tri-calcium phosphate. SeaSpine Bi-Ostetic Cancellous Blocks is safe and has excellent biocompatibility. After it is implanted, the implant resorbs and is later replaced by natural bone. SeaSpine Bi-Ostetic Cancellous Blocks is a natural choice for sparing patients the trauma of autograft harvesting. It also provides a safe alternative to human or animal cadaver bone that completely eliminates the potential for disease transmission. SeaSpine Bi-Ostetic Cancellous Blocks is an osteoconductive bone substitute shaped as blocks that are intended to be used to fill voids and gaps that are not intrinsic to the stability of the bone structure. These gaps or voids may be located in the extremities, spine, pelvis, or cranium. The blocks may be pressed into the void or into the surgical site by hand. The SeaSpine Bi-Ostetic Cancellous Blocks provide void filling material that acts as a temporary support medium. The blocks are not intended to provide structural support during the healing process. The implant is radio-opaque. SeaSpine Bi-Ostetic Cancellous Blocks is biocompatible and resorbs in the body as bone ingrowth occurs.

Device Characteristics

What MRI safety information does the labeling contain?	Labeling does not contain MRI Safety Information
Device required to be labeled as containing natural rubber latex or dry natural rubber (21 CFR 801.437):	No
Device labeled as "Not made with natural rubber latex":	No
For Single-Use:	Yes
Prescription Use (Rx):	Yes
Over the Counter (OTC):	No
Kit:	No
Combination Product:	No
Human Cell, Tissue or Cellular or Tissue-Based Product (HCT/P):	No

GMDN

[?]

GMDN Term Code	GMDN Term Name	GMDN Term Definition	GMDN Term Status [?]	Implantable?
17751	Bone matrix implant, synthetic, non-antimicrobial	A bioabsorbable device made of synthetic material intended to be implanted into the body to provide osteoconductive bone-tissue scaffolds, and sometimes osteovascularization, to replace bone lost through trauma, surgery, or pathological conditions (e.g., osteoporosis); it does not include an antimicrobial agent(s). It may be made of ceramics (e.g., tricalcium phosphate or hydroxyapatite), bioactive glasses/minerals/metals (e.g., strontium), or bioabsorbable polymers. It is used to fill cystic defects, repair fractures, and/or extend autogenous bone grafts and is typically provided as cancellous blocks, chips, or granules of varying sizes, or mouldable/fluid materials.	Active	true

FDA Product Code

[?]

Product Code	Product Code Name
MQV	Filler, Bone Void, Calcium Compound

FDA Premarket Submission

FDA Premarket Submission Number [?]	Supplement Number [?]
K023703	000

Device Exempt from Premarket Submission: No CLOSE

Sterilization

Device Packaged as Sterile: Yes
Requires Sterilization Prior to Use: No

Sterilization Method [?]
No Sterilization Methods Found

Storage and Handling

[?]

Storage and Handling
No storage/handling found

Clinically Relevant Size

[?]

Size Type Text
No Device Sizes

Device Record Status

Public Device Record Key: f8e380ce-72a1-4800-870d-bd07595fc25b
Public Version Date: June 19, 2020
Public Version Number: 6
DI Record Publish Date: November 03, 2016