AccessGUDID - DEVICE: NA (04055207033470)

GUDID

Device Identifier (DI) Information

Brand Name: NA
Version or Model: 825100011
Commercial Distribution Status: In Commercial Distribution
Catalog Number: 82510.0011
Company Name: Richard Wolf GmbH

Primary DI Number: 04055207033470
Issuing Agency: GS1
Commercial Distribution End Date:
Device Count: 1
Labeler D-U-N-S® Number*: 315304071 *Terms of Use

Device Description: LASER GUIDE TUBE ID 0.8MM WL 450MM reusable

Device Characteristics

What MRI safety information does the labeling contain?	Labeling does not contain MRI Safety Information
Device required to be labeled as containing natural rubber latex or dry natural rubber (21 CFR 801.437):	No
Device labeled as "Not made with natural rubber latex":	No
For Single-Use:	No
Prescription Use (Rx):	No
Over the Counter (OTC):	No
Kit:	No
Combination Product:	No
Human Cell, Tissue or Cellular or Tissue-Based Product (HCT/P):	No

GMDN

[?]

GMDN Names and Definitions: © Copyright GMDN Agency 2015. Reproduced with Permission from the GMDN Agency.

GMDN Preferred Term Name	GMDN Definition
Basic endotracheal tube, reusable	A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a reusable device.

GMDN Preferred Term Name

GMDN Definition

Basic endotracheal tube, reusable

A hollow cylinder inserted orally or nasally into the trachea to provide an unobstructed airway to convey gases and vapours to and from the lungs during anaesthesia, resuscitation, and other situations where the patient is not properly ventilated. The device may: 1) be packaged with a connector that will attach to a breathing circuit or manual resuscitator; 2) have a distal inflatable cuff to seal against the tracheal wall; 3) be radiopaque; and 4) have a built-in pilot balloon for cuff pressure monitoring. It is typically made of plastic or rubber and is available in various diameters and lengths for adult and paediatric patients. This is a reusable device.

FDA Product Code

[?]

Product Code	Product Code Name
KTI	BRONCHOSCOPE ACCESSORY

FDA Premarket Submission

FDA Premarket Submission Number [?]	Supplement Number [?]
Premarket Submission Number Not Available/Not Released

Device Exempt from Premarket Submission: Yes CLOSE

Sterilization

Device Packaged as Sterile: No
Requires Sterilization Prior to Use: Yes

Sterilization Method [?]
Moist Heat or Steam Sterilization
Ethylene Oxide
Hydrogen Peroxide

Storage and Handling

[?]

Storage and Handling
No storage/handling found

Clinically Relevant Size

[?]

Size Type Text
Length: 450 Millimeter
Lumen/Inner Diameter: 0.8 Millimeter

Device Record Status

Public Device Record Key: 244a3880-7654-4374-82ad-0bde433ab12d
Public Version Date: March 29, 2018
Public Version Number: 2
DI Record Publish Date: September 28, 2016