DEVICE: Flexcera™ Smile Ultra+ A1 0.5kg (04260683220461)
Device Identifier (DI) Information
Flexcera™ Smile Ultra+ A1 0.5kg
RES-01-3182
In Commercial Distribution
RES-01-3182
Envisiontec GmbH
RES-01-3182
In Commercial Distribution
RES-01-3182
Envisiontec GmbH
Flexcera™ Smile Ultra+ is a light-curing material for the additive manufacturing of permanent single and partial crowns, of artificial teeth, of veneers and of monolithic full and partial dentures and temporary crowns and bridges.
Device Characteristics
Labeling does not contain MRI Safety Information | |
No | |
No | |
Yes | |
Yes | |
No | |
No | |
No | |
No |
GMDN
[?]GMDN© Term Code, Names and Definitions (*Terms of Use): GMDN® is a registered trademark of The GMDN Agency. All rights reserved. Used under licence from The GMDN Agency Ltd.
GMDN Term Code | GMDN Term Name | GMDN Term Definition | GMDN Term Status [?] | Implantable? |
---|---|---|---|---|
38595 | Custom-made dental crown, polymer |
A device made entirely of polymer-based material with or without fibre reinforcement, and created for a specific post-pubescent/adult patient (custom-made), that functions as an artificial covering to replace the major part, or the whole part, of the clinical crown of a tooth.
|
Active | false |
38643 | Resin artificial teeth |
Prefabricated teeth made of polymer-based material for mounting on dentures. Teeth are normally delivered as sets of front teeth, upper or lower jaw, or sets of premolars and molars, upper or lower jaw, in various sizes, shapes and colours.
|
Active | false |
55831 | Denture base resin kit |
A collection of resins and other devices and/or materials intended to be used in the dental laboratory to manufacture a complete or partial denture base (the portion of a denture that rests on the oral mucosa and retains the artificial teeth). It usually includes the resin monomer (e.g., acrylic monomer of methyl methacrylate), a catalyst intended for polymerization, and additional products such as pigments, plasticizers, and/or devices (e.g., flasks, clamps). This is a single-use device.
|
Active | false |
17845 | Partial denture |
A custom-made, removeable, artificial replacement for one or more, but not all, teeth in the lower or upper jaw (mandible or maxilla) in a partially edentulous patient. It typically includes clasps of metal or plastic that clip onto remaining teeth for retention and stabilization. It can be made of a variety of materials including polymers [polymethylmethacrylate (PMMA), polycarbonate (PC)], acrylic, ceramics, and/or metals [e.g., base metal alloys or titanium (Ti)]. Also known as a removable partial denture (RPD).
|
Active | false |
38589 | Complete lower denture |
A custom-made artificial replacement for all teeth in the lower jaw (mandible) carried on a removable plate or frame which is supported by surrounding soft and hard tissues of the oral cavity. It can be made of a variety of materials including polymers [polymethylmethacrylate (PMMA), polycarbonate (PC)], acrylic, ceramics, and/or metals [e.g., base metal alloys or titanium (Ti)].
|
Active | false |
38588 | Complete upper denture |
A custom-made artificial replacement for all teeth in the upper jaw (maxilla) carried on a removable plate or frame which is supported by surrounding soft and hard tissues of the oral cavity. It can be made of a variety of materials including polymers [polymethylmethacrylate (PMMA), polycarbonate (PC)], acrylic, ceramics, and/or metals [e.g., base metal alloys or titanium (Ti)].
|
Active | false |
45236 | Temporary dental crown/bridge resin |
A material [e.g., polymethylmethacrylate (PMMA)] intended to make a temporary crown or bridge prosthesis for use until a permanent restoration is fabricated.
|
Active | false |
FDA Product Code
[?]Product Code | Product Code Name |
---|---|
EBF | Material, Tooth Shade, Resin |
EBI | Resin, Denture, Relining, Repairing, Rebasing |
PZY | Additively Manufactured, Preformed, Resin Denture Tooth |
ELM | Denture, Plastic, Teeth |
EBG | Crown And Bridge, Temporary, Resin |
FDA Premarket Submission
FDA Premarket Submission Number [?] | Supplement Number [?] |
---|---|
Premarket Submission Number Not Available/Not Released |
Sterilization
Storage and Handling
[?]Storage and Handling |
---|
Special Storage Condition, Specify: Protect from sunlight |
Handling Environment Temperature: between 41 and 86 Degrees Fahrenheit |
Clinically Relevant Size
[?]Size Type Text |
---|
No Device Sizes |
Device Record Status
737f6713-ba08-4ea3-94ea-e7b46697dea7
January 31, 2022
1
January 21, 2022
January 31, 2022
1
January 21, 2022
Alternative and Additional Identifiers Additional Identifiers
Package DI
[?]Package DI Number | Quantity per Package | Contains DI Package | Package Discontinue Date | Package Status | Package Type |
---|---|---|---|---|---|
No Package DIs found |
Secondary DI
[?]Issuing Agency [?] | Secondary DI Number |
---|---|
No Secondary DIs found |
Unit of Use DI
[?]
Unit of Use DI Number:
No Unit of Use DI Numbers Found
CLOSE
Direct Marking (DM)
[?]Production Identifier(s) in UDI
[?]Customer Contact
[?]
+49204398750
info@envisiontec.de
info@envisiontec.de