AccessGUDID - DEVICE: NEOVEIL (04548366322481)

GUDID

Device Identifier (DI) Information

Brand Name: NEOVEIL
Version or Model: NV-L-015G
Commercial Distribution Status: In Commercial Distribution
Catalog Number: NV-L-015G
Company Name: GUNZE LIMITED

Primary DI Number: 04548366322481
Issuing Agency: GS1
Commercial Distribution End Date:
Device Count: 1
Labeler D-U-N-S® Number*: 694678546 *Terms of Use

Device Description: As packaged, NEOVEIL is a suture- and staple-reinforcement product composed of 100% bioabsorbable polyglycolic acid (PGA). This nonwoven product is dyed with D&C Green No.6 in order to make it readily visible to the surgeon. Two forms of NEOVEIL are provided. The Tube type model constitutes of pre-formed porous bio-absorbable nonwoven sheets and is intended for staple-line reinforcement. The Tube type model is provided in the form of sleeves, one for the cartridge and one for the anvil on a corresponding stapler. After deployment of the tube type reinforcement material, the non-degradable elastic knits, comprised of polyurethane and nylon, are removed and discarded along with the PGA tacking sutures. The Sheet type model is simply a porous fibrous bio-absorbable sheet which is intended for suture-line reinforcement. The thickness of the bioabsorbable NEOVEIL staple line reinforcement ranges from 0.1 mm to 0.85 mm. Mesh weave characteristics and pore size are not applicable since NEOVEIL is nonwoven material. Average basis weight of the NEOVEIL model ranges from 35 to 225 (g/m2).

Device Characteristics

What MRI safety information does the labeling contain?	Labeling does not contain MRI Safety Information
Device required to be labeled as containing natural rubber latex or dry natural rubber (21 CFR 801.437):	No
Device labeled as "Not made with natural rubber latex":	No
For Single-Use:	Yes
Prescription Use (Rx):	Yes
Over the Counter (OTC):	No
Kit:	No
Combination Product:	No
Human Cell, Tissue or Cellular or Tissue-Based Product (HCT/P):	No

GMDN

[?]

GMDN Term Code	GMDN Term Name	GMDN Term Definition	GMDN Term Status [?]	Implantable?
44688	Extra-gynaecological surgical mesh, synthetic polymer, bioabsorbable	An implantable material (e.g., flat sheet) made from a bioabsorbable synthetic polymer(s) [e.g., polyglycolic acid (PGA), polycarbonate (PC), polyglycolide or carbon fibres] intended for extra-gynaecological, non-dental tissue repair/reinforcement application(s) [e.g., pericardial reinforcement, plastic surgery, abdominal hernia repair]. It may also be intended as a short-term scaffold for tissue regeneration. Disposable devices associated with implantation may be supplied with the mesh.	Active	true

FDA Product Code

[?]

Product Code	Product Code Name
OXC	Mesh, Surgical, Absorbable, Staple Line Reinforcement

FDA Premarket Submission

FDA Premarket Submission Number [?]	Supplement Number [?]
K130997	000

Device Exempt from Premarket Submission: No CLOSE

Sterilization

Device Packaged as Sterile: Yes
Requires Sterilization Prior to Use: No

Sterilization Method [?]
No Sterilization Methods Found

Storage and Handling

[?]

Storage and Handling
Storage Environment Temperature: less than 30 Degrees Celsius

Clinically Relevant Size

[?]

Size Type Text
Width: 100 Millimeter
Length: 100 Millimeter

Device Record Status

Public Device Record Key: e3602f4e-fa9d-4b17-9c72-20087706b946
Public Version Date: June 10, 2022
Public Version Number: 4
DI Record Publish Date: November 04, 2019