DEVICE: OSADA XL-230 (04580406860461)

An assembly of devices designed to both bore/excavate and saw bones, teeth, and tough tissues during a dental/maxillofacial surgical procedure. It typically consists of a motorized handpiece and/or motor, a control unit, and a variety of attachments used to hold the cutting instruments (e.g., drill bits, saw blades, burs, polishing disks). The system is electrically-powered from the mains (e.g., 230 or 115 volt) and supplies the handpiece/motor with low-voltage electricity (e.g., 24 volt) through the control unit. The system may operate through a dental delivery system or be freestanding and independent. This is a reusable device.

An assembly of devices intended to be used in a dental laboratory to bore/cut/grind dental fixtures, appliances, and materials for their preparation or repair. It typically consists of a drilling handpiece, a compact mains electricity (AC-powered) motor, an enclosed and flexible spinning cable (e.g., a Bowden cable), and a variety of dental power tool attachments to hold the active instruments (e.g., drills, burs, grind wheels). The spinning cable provides power to the handpiece from the electric motor which is placed distant from the site of operation, providing additional protection from exposure to electrical current. The system is typically combined with various speed controllers.

An assembly of devices designed to bore and excavate bones, teeth, and tough tissues during a dental surgical procedure. It typically consists of a motorized drill handpiece and/or motor, a control unit, and a variety of attachments used to hold the drilling/excavating endpieces (e.g., drill bits, burs, polishing disks). This system is electrically-powered from the mains (e.g., 230 or 115 volt) and supplies the handpiece/motor with low-voltage electricity (e.g., 24 volt) through a control unit. This is a reusable device.