AccessGUDID - DEVICE: Cross-Seal (04719872920359)

GUDID

Device Identifier (DI) Information

Brand Name: Cross-Seal
Version or Model: 002
Commercial Distribution Status: In Commercial Distribution
Catalog Number: 002
Company Name: MEDEON BIODESIGN, INC.

Primary DI Number: 04719872920359
Issuing Agency: GS1
Commercial Distribution End Date:
Device Count: 1
Labeler D-U-N-S® Number*: 656078460 *Terms of Use

Device Description: The Cross-Seal Device is composed of a Catheter, Suture Delivery System, and Handle. The Cross-Seal Device tracks over a standard 0.038” or 0.035” (minimum length 130 cm) guidewire. A hemostasis valve located in the middle of the CATHETER limits blood flow from the GUIDEWIRE PORT through the CATHETER with or without the guidewire in place. The SUTURE DELIVERY SYSTEM contains NEEDLES, LOCATOR WINGS, and the NEEDLE BARREL that control suture placement around the arteriotomy. The HANDLE contains the SLIDER, BLEEDING INDICATOR, PLUNGER, RESET 1 BUTTON (SLIDER RETRACTOR), and RESET 2 BUTTON (LOCATOR WINGS RETRACTOR). The SLIDER triggers a mechanism that opens the LOCATOR WINGS and creates a sandwich configuration to stabilize the delivery system within the vessel wall. The BLEEDING INDICATOR connects to a lumen that has an intraluminal port positioned at the distal end of the Suture Delivery System to allow bleeding back to ensure Suture Delivery System is positioned properly in the femoral artery. The NEEDLE BARREL keeps the Cross-Seal Device from moving deeper inside the vessel, stabilizes the device once the LOCATOR WINGS are opened and retrieves the disengaged suture-carried NEEDLES. The PLUNGER triggers the NEEDLES to deploy sutures and simultaneously close the LOCATOR WINGS. The GUIDEWIRE GUIDE is the feature at distal handle portion which allows physician to practice coaxial insertion of device along guidewire if necessary.

Device Characteristics

What MRI safety information does the labeling contain?	Labeling does not contain MRI Safety Information
Device required to be labeled as containing natural rubber latex or dry natural rubber (21 CFR 801.437):	No
Device labeled as "Not made with natural rubber latex":	Yes
For Single-Use:	Yes
Prescription Use (Rx):	Yes
Over the Counter (OTC):	No
Kit:	Yes
Combination Product:	No
Human Cell, Tissue or Cellular or Tissue-Based Product (HCT/P):	No

GMDN

[?]

GMDN Term Code	GMDN Term Name	GMDN Term Definition	GMDN Term Status [?]	Implantable?
13909	Polyolefin/fluoropolymer suture, monofilament	A single-strand (monofilament), synthetic, non-bioabsorbable thread made of a polyolefin (e.g., polypropylene, polyethylene) or fluoropolymer (e.g., polytetrafluoroethylene, polyvinylidene fluoride) intended to join (i.e., approximate) the edges of a soft-tissue wound or incision by stitching or to ligate soft tissues; it may include an attached disposable device(s) [e.g., needle, passer] intended to facilitate suture application. The thread provides temporary wound support until the wound sufficiently heals to withstand normal stress. It is not a barbed suture and does not include antimicrobial agents/materials. This is a single-use device.	Active	true

FDA Product Code

[?]

Product Code	Product Code Name
MGB	Device, Hemostasis, Vascular

FDA Premarket Submission

FDA Premarket Submission Number [?]	Supplement Number [?]
Premarket Submission Number Not Available/Not Released

Device Exempt from Premarket Submission: No CLOSE

Sterilization

Device Packaged as Sterile: Yes
Requires Sterilization Prior to Use: No

Sterilization Method [?]
No Sterilization Methods Found

Storage and Handling

[?]

Storage and Handling
No storage/handling found

Clinically Relevant Size

[?]

Size Type Text
No Device Sizes

Device Record Status

Public Device Record Key: 21c59bfa-8df4-4d25-b6e9-2e5b30492849
Public Version Date: June 02, 2023
Public Version Number: 2
DI Record Publish Date: February 01, 2022