DEVICE: Denture, restoration, splint (06972677875028)

A custom-made dental restoration made of gold-based alloy that is bonded within the center of a tooth (intracoronal) typically to serve as a well-fitting, long-lasting alternative to dental fillings for tooth decay or similar damage. It is fabricated indirectly in a dental lab, sometimes by computer-aided design/computer-aided manufacturing (CAD/CAM) techniques, before being fitted and bonded to the damaged tooth. This is a single-use device.

A material composed primarily of noble metals [e.g., gold (Au), palladium (Pd), platinum (Pt), or silver (Ag)] intended for use in the fabrication of a dental cast [i.e., a positive copy of a part of the oral anatomy made in an impression (mould), such as a dental crown] or dental restorations and appliances (e.g., porcelain-fused-to-metal crowns and bridge restorations). It is typically available in the form of small ingots or bars that are melted and poured into an impression. After application, this device cannot be reused.

A device made totally of metal alloy material, and created for a specific post-pubescent/adult patient (custom-made), that functions as an artificial covering to replace the major part, or the whole part, of the clinical crown of a tooth.

A custom-made artificial replacement for all teeth in the upper jaw (maxilla) carried on a removable plate or frame which is supported by surrounding soft and hard tissues of the oral cavity. It can be made of a variety of materials including polymers [polymethylmethacrylate (PMMA), polycarbonate (PC)], acrylic, ceramics, and/or metals [e.g., base metal alloys or titanium (Ti)].

A custom-made, non-removable, artificial replacement for one or more missing teeth made entirely of ceramic/porcelain material and comprised of an artifical tooth/teeth and crowns. It is fixed to abutment/adjacent teeth, tooth roots, or dental implants. Also referred to as a fixed partial prosthesis or a fixed partial denture.

An orthodontic appliance, bonded or removable, intended to be used on a single patient to maintain teeth in corrected positions during the period of functional adaptation following corrective treatment. This appliance, also referred to as a positioner, is also used to maintain the positions of the teeth and jaws gained by orthodontic procedures.

A custom-made artificial replacement for all teeth in the lower jaw (mandible) carried on a removable plate or frame which is supported by surrounding soft and hard tissues of the oral cavity. It can be made of a variety of materials including polymers [polymethylmethacrylate (PMMA), polycarbonate (PC)], acrylic, ceramics, and/or metals [e.g., base metal alloys or titanium (Ti)].

A device made totally of ceramic material, and created for a specific post-pubescent/adult patient (custom-made), that functions as an artificial covering to replace the major part, or the whole part, of the clinical crown of a tooth.

A device made of metal, veneered with a polymer-based, tooth-coloured material, and created for a specific post-pubescent/adult patient (custom-made), that functions as an artificial covering to replace the major part, or the whole part, of the clinical crown of a tooth.

A device made entirely of polymer-based material with or without fibre reinforcement, and created for a specific post-pubescent/adult patient (custom-made), that functions as an artificial covering to replace the major part, or the whole part, of the clinical crown of a tooth.

A custom-made, non-removable, artificial replacement for one or more missing teeth made of metal alloy with a tooth-coloured polymer material (veneer), and comprised of an artifical tooth/teeth and crowns. It is fixed to abutment/adjacent teeth, tooth roots, or dental implants. Also referred to as a fixed partial prosthesis or a fixed partial denture.

A rigid or flexible prefabricated device intended to overlay the occlusal surfaces of the teeth to maintain the position of displaced or moveable teeth, to treat clenching and bruxism and their sequelae, and to provide temporary relief from muscle or temporo-mandibular joint (TMJ) pain (e.g., from TMJ dysfunction). It is removable by the patient (e.g., during meals), and is typically made of standard, preformed materials that are not moulded, or intended to be moulded to a specific patient. This is a reusable device.

A custom-made, non-removable, artificial replacement for one or more missing teeth made entirely of polymer-based material, with or without fibre reinforcement, and comprised of an artifical tooth/teeth and crowns. It is fixed to abutment/adjacent teeth, tooth roots, or dental implants. Also referred to as a fixed partial prosthesis or a fixed partial denture.

A custom-made dental restoration made of ceramic material that is bonded within the center of a tooth (intracoronal) typically to serve as a well-fitting, long-lasting alternative to dental fillings for tooth decay or similar damage. It is fabricated indirectly in a dental lab, sometimes by computer-aided design/computer-aided manufacturing (CAD/CAM) techniques, before being fitted and bonded to the damaged tooth. This is a single-use device.

A custom-made dental restoration made of ceramic or polymer-based material (resin) intended to be used in aesthetic dentistry to correct the facial surface of a tooth; it is intended to be applied to the teeth by a dental professional for long-term use, typically via an adhesive. This is a single-use device.

A custom-made dental restoration made of resin-based material that is bonded within the center of a tooth (intracoronal) typically to serve as a well-fitting, long-lasting alternative to dental fillings for tooth decay or similar damage. It is fabricated indirectly in a dental lab, sometimes by computer-aided design/computer-aided manufacturing (CAD/CAM) techniques, before being fitted and bonded to the damaged tooth. This is a single-use device.