AccessGUDID - DEVICE: VARIAX (07613327072679)

GUDID

Device Identifier (DI) Information

Brand Name: VARIAX
Version or Model: 703818
Commercial Distribution Status: In Commercial Distribution
Catalog Number: 703818
Company Name: Stryker Trauma SA

Primary DI Number: 07613327072679
Issuing Agency: GS1
Commercial Distribution End Date:
Device Count: 1
Labeler D-U-N-S® Number*: 481999654 *Terms of Use

Device Description: Kirschner Wire with Stop with ¿4.5mm Stop

Device Characteristics

What MRI safety information does the labeling contain?	Labeling does not contain MRI Safety Information
Device required to be labeled as containing natural rubber latex or dry natural rubber (21 CFR 801.437):	No
Device labeled as "Not made with natural rubber latex":	No
For Single-Use:	Yes
Prescription Use (Rx):	Yes
Over the Counter (OTC):	No
Kit:	No
Combination Product:	No
Human Cell, Tissue or Cellular or Tissue-Based Product (HCT/P):	No

GMDN

[?]

GMDN Names and Definitions: © Copyright GMDN Agency 2015. Reproduced with Permission from the GMDN Agency.

GMDN Preferred Term Name	GMDN Definition
Orthopaedic bone wire	A wire intended for the fixation of bone fractures that may be implanted or used short-term (e.g., to hold a plate in the correct position during an intervention). It may be used: 1) as a cerclage wire to aid bone fixation; 2) in a loop or figure-of-eight configuration to reattach, e.g., the tip of the elbow (olecranon), tibial tubercle, or greater trochanter; 3) to augment bone screw/plate fixation; or 4) as a Kirschner wire or K-Wire to stiffen (arthrodese) a toe or finger. It is made of metal [e.g., stainless steel, cobalt-chrome (Co-Cr)], and may be malleable or rigid; some types include a nut designed to be attached to the wire to prevent wire migration. This is a single-use device.

GMDN Preferred Term Name

GMDN Definition

Orthopaedic bone wire

A wire intended for the fixation of bone fractures that may be implanted or used short-term (e.g., to hold a plate in the correct position during an intervention). It may be used: 1) as a cerclage wire to aid bone fixation; 2) in a loop or figure-of-eight configuration to reattach, e.g., the tip of the elbow (olecranon), tibial tubercle, or greater trochanter; 3) to augment bone screw/plate fixation; or 4) as a Kirschner wire or K-Wire to stiffen (arthrodese) a toe or finger. It is made of metal [e.g., stainless steel, cobalt-chrome (Co-Cr)], and may be malleable or rigid; some types include a nut designed to be attached to the wire to prevent wire migration. This is a single-use device.

FDA Product Code

[?]

Product Code	Product Code Name
HRS	Plate, fixation, bone

FDA Premarket Submission

FDA Premarket Submission Number [?]	Supplement Number [?]
Premarket Submission Number Not Available/Not Released

Device Exempt from Premarket Submission: No CLOSE

Sterilization

Device Packaged as Sterile: No
Requires Sterilization Prior to Use: Yes

Sterilization Method [?]
Moist Heat or Steam Sterilization

Storage and Handling

[?]

Storage and Handling
No storage/handling found

Clinically Relevant Size

[?]

Size Type Text
Device Size Text, specify: Diameter: 2.0 Millimeter
Length: 150.0 Millimeter

Device Record Status

Public Device Record Key: b62fd9d1-1f6e-4d37-b0e4-e71ae7659e51
Public Version Date: March 29, 2018
Public Version Number: 2
DI Record Publish Date: September 22, 2016