AccessGUDID - DEVICE: SpinePlex (07613327141788)

GUDID

Device Identifier (DI) Information

Brand Name: SpinePlex
Version or Model: 0406202010
Commercial Distribution Status: In Commercial Distribution
Catalog Number: 0406-202-010
Company Name: STRYKER CORPORATION

Primary DI Number: 07613327141788
Issuing Agency: GS1
Commercial Distribution End Date:
Device Count: 1
Labeler D-U-N-S® Number*: 196548481 *Terms of Use

Device Description: Half Dose

Device Characteristics

What MRI safety information does the labeling contain?	Labeling does not contain MRI Safety Information
Device required to be labeled as containing natural rubber latex or dry natural rubber (21 CFR 801.437):	No
Device labeled as "Not made with natural rubber latex":	No
For Single-Use:	Yes
Prescription Use (Rx):	Yes
Over the Counter (OTC):	No
Kit:	No
Combination Product:	No
Human Cell, Tissue or Cellular or Tissue-Based Product (HCT/P):	No

GMDN

[?]

GMDN Names and Definitions: © Copyright GMDN Agency 2015. Reproduced with Permission from the GMDN Agency.

GMDN Preferred Term Name	GMDN Definition
Orthopaedic cement, non-medicated	A substance designed to be used in arthroplastic and/or osteosynthetic procedures for the fixation of polymer or metallic implants to the living bone. It may also be intended for use as a filler in the case of bone pathologies (e.g., to stabilize and reinforce vertebral body structures in vertebroplasty and kyphoplasty). It is typically made from methylmethacrylate, polymethylmethacrylate (PMMA), esters of methacrylic acid or copolymers containing polymethylmethacrylate and polystyrene. This device does not contain an antimicrobial agent. After application, this device cannot be reused.

GMDN Preferred Term Name

GMDN Definition

Orthopaedic cement, non-medicated

A substance designed to be used in arthroplastic and/or osteosynthetic procedures for the fixation of polymer or metallic implants to the living bone. It may also be intended for use as a filler in the case of bone pathologies (e.g., to stabilize and reinforce vertebral body structures in vertebroplasty and kyphoplasty). It is typically made from methylmethacrylate, polymethylmethacrylate (PMMA), esters of methacrylic acid or copolymers containing polymethylmethacrylate and polystyrene. This device does not contain an antimicrobial agent. After application, this device cannot be reused.

FDA Product Code

[?]

Product Code	Product Code Name
NDN	CEMENT, BONE, VERTEBROPLASTY

FDA Premarket Submission

FDA Premarket Submission Number [?]	Supplement Number [?]
Premarket Submission Number Not Available/Not Released

Device Exempt from Premarket Submission: No CLOSE

Sterilization

Device Packaged as Sterile: Yes
Requires Sterilization Prior to Use: No

Sterilization Method [?]
No Sterilization Methods Found

Storage and Handling

[?]

Storage and Handling
No storage/handling found

Clinically Relevant Size

[?]

Size Type Text
No Device Sizes

Device Record Status

Public Device Record Key: 49737dee-714b-4bac-8692-ad0b1121b39b
Public Version Date: July 05, 2019
Public Version Number: 3
DI Record Publish Date: September 23, 2016