AccessGUDID - DEVICE: DIO PROTEM IMPLANT SYSTEM (08800049214664)

GUDID

Device Identifier (DI) Information

Brand Name: DIO PROTEM IMPLANT SYSTEM
Version or Model: MFP 25214
Commercial Distribution Status: In Commercial Distribution
Catalog Number: MFP 25214
Company Name: DIO Corporation

Primary DI Number: 08800049214664
Issuing Agency: GS1
Commercial Distribution End Date:
Device Count: 1
Labeler D-U-N-S® Number*: 631085206 *Terms of Use

Device Description: DIO Protein Implant System consists of Protein Implants, Superstructure, Prosthetics and Surgical Instruments. The Protein Implants is an integrated system of endosseous dental implants which designed to protect main implant from immediate loading during osteointegration period, to increase indurance of temporary tooth and to conduct the immediate functions and immediate recovery of aesthetics of osteoimplanted area. These are made of titanium alloy which have a sandblasted, RBM(Resorbable Blast Media) treated surface. These implants are consist of one-stage, root-form dental implants which provide the clinician to maintain the patients' gingival contour. The Implants have the diameter(2.0/2.5mm) and length.(8/10/12/14mm). The superstructures consist of Protein Cemented Abutment, Ball Cap and Healing Cap. The Protein Cemented Abutments are made of titanium and intended for cement-retained restorations where conventional crown & bridge techniques are required. It can be used for single or multiple unit restorations. Ball Cap intended to retain the O-ring inside of the denture. Healing Cap is fixed on the ball type fixture to protect the direct pressure reduce the motion of fixture. The Prosthetics and Surgical Instruments provide the clinician to choose only those components required for each clinical situation. The implants are gamma sterilized and intended to single use. And the surgical tools are nongamma sterilized and have to be sterilized by user before using.

Device Characteristics

What MRI safety information does the labeling contain?	Labeling does not contain MRI Safety Information
Device required to be labeled as containing natural rubber latex or dry natural rubber (21 CFR 801.437):	No
Device labeled as "Not made with natural rubber latex":	No
For Single-Use:	Yes
Prescription Use (Rx):	Yes
Over the Counter (OTC):	No
Kit:	No
Combination Product:	No
Human Cell, Tissue or Cellular or Tissue-Based Product (HCT/P):	No

GMDN

[?]

GMDN Term Code	GMDN Term Name	GMDN Term Definition	GMDN Term Status [?]	Implantable?
55849	Screw endosteal dental implant, two-piece	A sterile device made of alloplastic materials [e.g., titanium (Ti), stainless steel, ceramic] intended to be surgically implanted into alveolar and/or basal bone of the mandible or maxilla to provide support and a means of retention for a dental prosthesis (e.g., bridge, single-tooth, overdenture). It is a two-piece device composed of an anchorage component (implant body) in the form of a threaded screw that is implanted into bone, and a retention component (implant abutment), typically attached to the anchorage component after implantation, that protrudes through gingival tissues to support the prosthesis.	Active	true

FDA Product Code

[?]

Product Code	Product Code Name
DZE	Implant, Endosseous, Root-Form

FDA Premarket Submission

FDA Premarket Submission Number [?]	Supplement Number [?]
K080126	000

Device Exempt from Premarket Submission: No CLOSE

Sterilization

Device Packaged as Sterile: Yes
Requires Sterilization Prior to Use: No

Sterilization Method [?]
No Sterilization Methods Found

Storage and Handling

[?]

Storage and Handling
Storage Environment Temperature: between 1 and 30 Degrees Celsius

Clinically Relevant Size

[?]

Size Type Text
Device Size Text, specify: ® Ø2.5X14mm

Device Record Status

Public Device Record Key: a8ca3afd-1ff5-47ff-8365-fbd3ecd765cb
Public Version Date: March 09, 2022
Public Version Number: 1
DI Record Publish Date: March 01, 2022