AccessGUDID - DEVICE: DIO UF HSA INTERNAL SUB-MERGED IMPLANT SYSTEM (08800049269602)

GUDID

Device Identifier (DI) Information

Brand Name: DIO UF HSA INTERNAL SUB-MERGED IMPLANT SYSTEM
Version or Model: SSOA 6045
Commercial Distribution Status: In Commercial Distribution
Catalog Number: SSOA 6045
Company Name: DIO Corporation

Primary DI Number: 08800049269602
Issuing Agency: GS1
Commercial Distribution End Date:
Device Count: 1
Labeler D-U-N-S® Number*: 631085206 *Terms of Use

Device Description: The DIO UF HSA Internal Sub-Merged Implant System is comprised of dental implants, Superstructures, Instruments for prosthetics and Surgical Instruments. The DIO UF HSA Internal Sub-Merged Implant System is specially designed for using in dental implant surery. A successfully osseointegrated implant willl achieve a firm implant when the fixture is operated under controlled conditions, per well known clinical studies. There are intended for use in partially or fully edendulous mandibles and maxillae, in support of single or multiple-unit restorations. The superstructures consist of screws(Cover Screw, Coping Screw), abutments(Screw retained type, Cemented retained type, Over denture retained type), Solid protect cap. The screws are made of commercial pure titanium, grade 4(ASTM F67) and Ti-6A1-4VELI(ASTM F136) intended to be used in a narrow tooth gap after implant insertion. And the screw is used to protect exposed top of the implant or to attach the abutment to implant.

Device Characteristics

What MRI safety information does the labeling contain?	Labeling does not contain MRI Safety Information
Device required to be labeled as containing natural rubber latex or dry natural rubber (21 CFR 801.437):	No
Device labeled as "Not made with natural rubber latex":	No
For Single-Use:	Yes
Prescription Use (Rx):	Yes
Over the Counter (OTC):	No
Kit:	No
Combination Product:	No
Human Cell, Tissue or Cellular or Tissue-Based Product (HCT/P):	No

GMDN

[?]

GMDN Term Code	GMDN Term Name	GMDN Term Definition	GMDN Term Status [?]	Implantable?
44879	Dental implant suprastructure, permanent, preformed	A prefabricated device intended to provide a permanent intermediate fixture level between a dental implant and the final prosthesis/restoration (e.g., bridge, single tooth, overdenture). It includes one or more structural component(s) [e.g., abutment, ball, bar, bar overlay, coping, ring], and may be made of various materials [e.g., titanium (Ti), plastic, gold alloy]. It includes devices glued to prostheses and/or devices that can be replaced during cleaning cycles. An abutment screw(s) may be included, however the suprastructure does not represent the screw(s) in isolation. It may also be referred to as an abutment assembly or mesostructure.	Active	true

FDA Product Code

[?]

Product Code	Product Code Name
NHA	Abutment, Implant, Dental, Endosseous

FDA Premarket Submission

FDA Premarket Submission Number [?]	Supplement Number [?]
Premarket Submission Number Not Available/Not Released

Device Exempt from Premarket Submission: No CLOSE

Sterilization

Device Packaged as Sterile: No
Requires Sterilization Prior to Use: Yes

Sterilization Method [?]
Moist Heat or Steam Sterilization

Storage and Handling

[?]

Storage and Handling
Storage Environment Temperature: between 1 and 30 Degrees Celsius

Clinically Relevant Size

[?]

Size Type Text
Device Size Text, specify: Ø6.0X4.5(Cuff)mm

Device Record Status

Public Device Record Key: 3d14aee5-7767-4661-b666-c717e6f885cd
Public Version Date: November 17, 2022
Public Version Number: 2
DI Record Publish Date: March 01, 2022