DEVICE: KIT KE167 COLE (20607915131245)

Download: XML | JSON

Device Identifier (DI) Information

KIT KE167 COLE
GK242

APPLIED MEDICAL RESOURCES CORPORATION
20607915131245
GS1
1
Kit Contains: C2201, 120MM INSUFF NEEDLE XE, 20/BX CTF12, 5x100 Kii Fios ZTHR DP 10/BX CTF33, 11x100 Kii Fios ZTHR 6/BX CTS12, 11x100 Kii SLEEVE ZTHR 12/BX CA090, DIRECT DRIVE LCA 3/BX C6001, 5mmX33cm PROB/VALV DUAL BAG 12/BX CB030, 5mmx35cm EPIX LAPA SCISSOR, 10/BX CY010, 5mmX35cm EPIX LAPA DISSECT, 10/BX
CLOSE

Device Characteristics

Labeling does not contain MRI Safety Information
No
Yes
Yes
Yes
No
Yes
No
No

GMDN

[?]

GMDN Names and Definitions: © Copyright GMDN Agency 2015. Reproduced with Permission from the GMDN Agency.

GMDN Preferred Term Name GMDN Definition
Laparoscopic electrosurgical blunt dissector A sterile, rigid, laparoscopic device, covered with a sheath of electrical insulation, designed to perform through a compatible laparoscopic instrument (e.g., an access port) and to be connected to an electrosurgical diathermy generator when required to provide electrical current, to facilitate blunt dissection (e.g., hernia repair, cholecystectomy, colectomy) between tissue planes accessible via the abdominal cavity. It is a monopolar device typically constructed as a long insulated metal instrument whose distal end is equipped with a stainless steel scissors-like tip of various configurations operated through scissors-like ring handles at the proximal end. This is a single-use device.
Endoscopic electrosurgical handpiece/electrode, monopolar, single-use A sterile electrosurgical device which consists of a handpiece with mechanical and/or electrical controls, and a monopolar electrode, intended to deliver electrosurgical current from a system generator directly to tissues for cutting/coagulation/ablation during endoscopic (including laparoscopic, arthroscopic) surgery. It includes a long thin electrode connected to the handpiece, and may include a lumen for suction/irrigation; it is available in a variety of forms (e.g., forceps or snare with ring handles, rigid probe with controls) and requires a patient contact return electrode to complete the circuit. This is a single-use device.
Laparoscopic irrigation/aspiration cannula A rigid, sterile, hand-operated, tube-like device intended to be inserted through a laparoscopic port to provide a conduit for the instillation and/or aspiration of fluid during laparoscopy. It has a single lumen, a proximal handle, and is typically made of plastic materials. It is connected via tubing to an appropriate irrigating/aspirating device(s), the irrigation/aspiration being regulated by the operator with mechanical valve controls typically in the handle of the cannula. This is a single-use device.
Laparoscopic access cannula, single-use A sterile, single-lumen surgical device intended to be percutaneously inserted through the abdominal wall to create an access port for a laparoscope/laparoscopic instrument during laparoscopy. The cannula is often provided with a shut-off valve for gas/fluid supply, and other sealing devices (e.g., dedicated seals/rings, caps, valves), to prevent insufflation gas leakage whilst allowing entry of instruments. It may include a sharp or blunt trocar blade to assist introduction and/or puncture the abdominal wall; if the trocar is included it may be referred to as a trocar or trocar assembly. It is available in a variety of dimensions and/or designs. This is a single-use device.
Spring-loaded pneumoperitoneum needle, single-use A slender, sharply-pointed metal tube designed to introduce or remove gas from the peritoneal cavity as a therapeutic or surgical/radiological procedural method. It is often inserted into the peritoneal cavity for the purpose of insufflation [e.g., with carbon dioxide (CO2)] to establish pneumoperitoneum prior to abdominal endoscopy. It is equipped with a spring-loaded, round-tipped obturator that extends from the tube when the device does not encounter resistance (i.e., when the cavity has been reached) to prevent damage from the sharp point. This is a single-use device.
Ligation clip, metallic A sterile, metallic, non-bioabsorbable clasp designed to be implanted around a blood vessel, lymphatic vessel, other tubular anatomy, or a tissue bundle for permanent occlusion. It may be used for ligation in open and endoscopic (e.g., laparoscopic) surgeries.
CLOSE

FDA Product Code

[?]
Product Code Product Code Name
FHF System, Evacuator, Fluid
GEI Electrosurgical, Cutting & Coagulation & Accessories
HET Laparoscope, Gynecologic (And Accessories)
GCJ Laparoscope, General & Plastic Surgery
FZP Clip, Implantable
MDM Instrument, Manual, Surgical, General Use
CLOSE

Sterilization

Yes
No
Sterilization Method [?]
No Sterilization Methods Found
CLOSE

Storage and Handling

[?]
Storage and Handling
No storage/handling found
CLOSE

Clinically Relevant Size

[?]
Size Type Text
No Device Sizes
CLOSE

Device Status

In Commercial Distribution
October 09, 2015

CLOSE

Alternative and Additional Identifiers Additional Identifiers

Package DI

[?]
Package DI Number Quantity per Package Contains DI Package Package Discontinue Date Package Status Package Type
No Package DIs found
CLOSE

Secondary DI

[?]
Issuing Agency [?] Secondary DI Number
No Secondary DIs found
CLOSE

Unit of Use DI

[?]
Unit of Use DI Number: No Unit of Use DI Numbers Found CLOSE

Direct Marking (DM)

[?]
No
No
None
CLOSE

Production Identifier(s) in UDI

[?]
Yes
No
Yes
No
No CLOSE

Customer Contact

[?]
1.949.713.8300
contact@appliedmedical.com
CLOSE