DEVICE: 3D SCANNER (TNC) (B01612300000TZ0)

Device Identifier (DI) Information

3D SCANNER (TNC)
12300000TZ
In Commercial Distribution
12300000TZ
SUN NUCLEAR CORP.
B01612300000TZ0
HIBCC

1
122240021 *Terms of Use
Radiation therapy QA device.
CLOSE

Device Characteristics

Labeling does not contain MRI Safety Information
No
No
No
Yes
No
No
No
No

GMDN

[?]

GMDN Names and Definitions: © Copyright GMDN Agency 2015. Reproduced with Permission from the GMDN Agency.

GMDN Preferred Term Name GMDN Definition
Accelerator system quality assurance device An instrument specifically designed to be used to check the calibration and performance of linear and non-linear medical accelerator systems used for radiation therapy applications, for quality assurance (QA) purposes. It includes a variety of instruments used to measure parameters associated with particle and photon beam production, beam quality, and other system performance parameters.
CLOSE

FDA Product Code

[?]
Product Code Product Code Name
IYE Accelerator, Linear, Medical
CLOSE

FDA Premarket Submission

FDA Premarket Submission Number [?] Supplement Number [?]
K101992 000
No CLOSE

Sterilization

No
No
Sterilization Method [?]
No Sterilization Methods Found
CLOSE

Storage and Handling

[?]
Storage and Handling
Special Storage Condition, Specify: Never store the 3D SCANNER system in an area that is under construction. Excessive dust may reduce the precision of the 3D SCANNER motors and mechanical parts.
Special Storage Condition, Specify: When shipping/transporting the 3D SCANNER system between facilities, it is recommended to use the accessory shipping cases for the 3D SCANNER Water Tank, Automatic Leveling Platform, and 3D MiniLift.
Special Storage Condition, Specify: When measurement is complete, the 3D SCANNER Water Tank can remain attached to the Automatic Leveling Platform and 3D MiniLift or 3D Lift (recommended).
Special Storage Condition, Specify: If the 3D SCANNER Water Tank needs transportation independent of the Leveling Platform and 3D MiniLift or 3D Lift, use the four handles on the Lift Ring at the base of the Water Tank for support.
Special Storage Condition, Specify: The 3D SCANNER, 3D MiniLift or 3D Lift, and Automatic Leveling Platform must be stored in an indoor air-conditioned location.
Special Storage Condition, Specify: To maintain mechanical integrity, do not store water in the Water Tank. Ensure that the system is clean and dry before storing.
Special Storage Condition, Specify: Before storing the 3D SCANNER system, place the protective caps on the electrometer FIELD and REF inputs, ensure that all parts are clean and dry, and then place the dust cover over the Water Tank.
Special Storage Condition, Specify: If the 3D SCANNER, 3D MiniLift, or 3D Lift were shipped in a wood crate, do not re-use the crate for storage or shipping. Accessory shipping cases are available.
Special Storage Condition, Specify: For transport and storage within the facility, the 3D SCANNER water tank can remain attached to the 3D MiniLift or 3D Lift as well as the Automatic Leveling Platform.
Special Storage Condition, Specify: Store the 3D SCANNER system in an indoor, climate-controlled environment where it will not be irradiated by the direct beam and where scattered radiation will be kept at a minimum.
Special Storage Condition, Specify: Two person lift required. Use proper lifting and handling techniques to prevent injury or equipment damage. Lift the Water Tank using the four lift handles.
Handling Environment Atmospheric Pressure: between 18.7 and 106 KiloPascal
Handling Environment Humidity: between 10 and 90 Percent (%) Relative Humidity
Handling Environment Temperature: between -30 and 50 Degrees Celsius
Storage Environment Atmospheric Pressure: between 57.2 and 106 KiloPascal
Storage Environment Humidity: between 10 and 90 Percent (%) Relative Humidity
Storage Environment Temperature: between 10 and 40 Degrees Celsius
Special Storage Condition, Specify: Do not store any radiation sensitive electronic equipment in the 3D Lift storage compartments.
Special Storage Condition, Specify: Do not store any items in the Water Tank that are not used operationally or are not part of the 3D SCANNER system.
Special Storage Condition, Specify: Never store the 3D SCANNER system, associated parts, or accessories inside the treatment room.
CLOSE

Clinically Relevant Size

[?]
Size Type Text
No Device Sizes
CLOSE

Device Record Status

98a3193f-eeb6-45b0-b856-c3d82fb60a4e
July 06, 2018
3
January 14, 2017
CLOSE

Alternative and Additional Identifiers Additional Identifiers

Package DI

[?]
Package DI Number Quantity per Package Contains DI Package Package Discontinue Date Package Status Package Type
No Package DIs found
CLOSE

Secondary DI

[?]
Issuing Agency [?] Secondary DI Number
No Secondary DIs found
CLOSE

Unit of Use DI

[?]
Unit of Use DI Number: No Unit of Use DI Numbers Found CLOSE

Direct Marking (DM)

[?]
No
No
None
CLOSE

Production Identifier(s) in UDI

[?]
Yes
Yes
No
Yes
No CLOSE

Customer Contact

[?]
No Customer Contact currently defined
CLOSE