DEVICE: ArcPhix System (B487EXARC9030280)

A hand-held manual surgical instrument designed to impart force to an orthopaedic implantable device that is inserted to fix or fasten together bones. The device is frequently used to insert devices such as screws, nails, plates, or wires that are used to fix fractured or damaged bones and/or to attach orthopaedic prostheses to the bones. It is typically made of high-grade stainless steel or titanium (Ti). This is a reusable device.

A thin, non-implantable rod designed to guide the insertion of a cannulated/tubular orthopaedic implant (typically an intramedullary nail, a bone screw or femoral fixation plate) and/or surgical instrument (e.g., drill bit) during an orthopaedic procedure. It is made of metal and is available in a variety of sizes, lengths, and designs (e.g., round-tip, trocar-tip, or flexible-tip). This is a single-use device.

A metal shaft intended to be mounted into an appropriate surgical power tool (e.g., a pneumatic reamer or drilling system handpiece with appropriate torque capacity) and rotated to bore into hard/tough tissues (e.g., bone, cartilage) in order to clear a channel of the same diameter as the shaft, typically for the insertion of a prosthetic device or other orthopaedic implant. It has a hollow centre so it can be fed over a drill guiding pin, and may be flexible; devices to assist the procedure (e.g., drill guiding pin, manual driver) may be included. This is a single-use device.

A small, threaded, non-bioabsorbable, implantable rod intended for internal orthopaedic fixation by being screwed into a limb bone, rib, the sternum and/or pelvis to hold a plate, nail, rod or prosthesis to the bone, or to provide direct interfragmentary stabilization of a fractured bone; it is not intended to be introduced through the sleeve of a femoral neck fixation plate/sleeve, not used in dentistry/orthodontics, craniofacial or spinal bones, and not dedicated to intramedullary fixation/arthrodesis. It is typically of cortical or cancellous design and has a drive (e.g., slot, cross, star, polygonal) at its proximal end for introduction with a screwdriver.