AccessGUDID - DEVICE: Guardian® II hemostasis valve (M20682110)

GUDID

Device Identifier (DI) Information

Brand Name: Guardian® II hemostasis valve
Version or Model: 8211
Commercial Distribution Status: Not in Commercial Distribution
Catalog Number:
Company Name: Vascular Solutions, Inc.

Primary DI Number: M20682110
Issuing Agency: HIBCC
Commercial Distribution End Date: November 22, 2021
Device Count: 1
Labeler D-U-N-S® Number*: 008999906 *Terms of Use

Device Description: The Guardian hemostasis valves are intended to maintain hemostasis during the use of diagnostic or interventional devices. Guardian hemostasis valves are indicated for maintaining a seal around diagnostic/interventional devices with outside diameters up to 8F (0.105" or 2.67mm) during diagnostic/interventional procedures. The torque device is provided as an aid for steering the guidewire within the vascular anatomy.

Device Characteristics

What MRI safety information does the labeling contain?	Labeling does not contain MRI Safety Information
Device required to be labeled as containing natural rubber latex or dry natural rubber (21 CFR 801.437):	No
Device labeled as "Not made with natural rubber latex":	No
For Single-Use:	Yes
Prescription Use (Rx):	Yes
Over the Counter (OTC):	No
Kit:	Yes
Combination Product:	No
Human Cell, Tissue or Cellular or Tissue-Based Product (HCT/P):	No

GMDN

[?]

GMDN Term Code	GMDN Term Name	GMDN Term Definition	GMDN Term Status [?]	Implantable?
36079	Haemostasis valve	A noninvasive device designed as a conduit through which a small-diameter diagnostic/interventional device(s) can be introduced into or withdrawn from a patient's vasculature while preventing backflow of blood; it might in addition be intended for urinary applications. It is intended to be attached, typically via Luer-lock, to an invasively-placed catheter introducer (not included) and typically has a self-sealing lumen(s) [e.g., Touhy-Borst valve] and sideport for the introduction of solutions. It may include noninvasive guidewire accessories (e.g., guidewire introducer). It is not designed to be connected between tubing (i.e., not an in-line valve). This is a single-use device.	Active	false

FDA Product Code

[?]

Product Code	Product Code Name
DTL	Adaptor, Stopcock, Manifold, Fitting, Cardiopulmonary Bypass

FDA Premarket Submission

FDA Premarket Submission Number [?]	Supplement Number [?]
Premarket Submission Number Not Available/Not Released

Device Exempt from Premarket Submission: No CLOSE

Sterilization

Device Packaged as Sterile: Yes
Requires Sterilization Prior to Use: No

Sterilization Method [?]
No Sterilization Methods Found

Storage and Handling

[?]

Storage and Handling
No storage/handling found

Clinically Relevant Size

[?]

Size Type Text
No Device Sizes

Device Record Status

Public Device Record Key: 6c5dbe61-2bdf-44da-aa3d-762fbeaa4122
Public Version Date: June 09, 2023
Public Version Number: 6
DI Record Publish Date: September 06, 2016