SEARCH RESULTS FOR: 出海电商0成本推广🚩TG@yuantou2048🚩最快24小时见效出海推广营销一条龙(4999 results)
The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors.
All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has a
prominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.
SIGNUS Medizintechnik GmbH
Set screw tulips cross connector, reduction T15
In Commercial Distribution
- 04047844098486 ()
- Ø6,1x20,3mm
CA0160-00300
- Spinal bone set screw
The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors.
All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has a
prominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.
SIGNUS Medizintechnik GmbH
Retaining nut tulips cross connector
In Commercial Distribution
- 04047844098479 ()
CA0160-00200
- Spinal bone set screw
The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors.
All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has a
prominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.
SIGNUS Medizintechnik GmbH
Set screw tulips cross connector T15
In Commercial Distribution
- 04047844098462 ()
- Ø6,1x8mm
CA0160-00100
- Spinal bone set screw
The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors.
All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has a
prominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.
SIGNUS Medizintechnik GmbH
Set screw parallel/inline connector T15
In Commercial Distribution
- 04047844098110 ()
- Ø6,1x8mm
CA0150-00100
- Spinal bone set screw
The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors.
All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has a
prominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.
SIGNUS Medizintechnik GmbH
Set screw T15
In Commercial Distribution
- 04047844098103 ()
- Ø6,1x2,8mm
CA0141-35000
- Spinal bone set screw
The VERTACONNECT TLIF Spreadable Lumbar Cage is a spacer for implantation in aprepared intervertebral disc space of the lumbar spine. Its design offers stable contact
surfaces, toothed implant/bone surfaces and large cage windows. The open implant design supports a bony construction of the intervertebral disc space. The implants consist of a cage and a pre-assembled expansion element.
SIGNUS Medizintechnik GmbH
Lumbar cage, angled
In Commercial Distribution
- 04047844066744 ()
- 37x19/12mm
CAT371912
- Metallic spinal interbody fusion cage
The VERTACONNECT TLIF Spreadable Lumbar Cage is a spacer for implantation in aprepared intervertebral disc space of the lumbar spine. Its design offers stable contact
surfaces, toothed implant/bone surfaces and large cage windows. The open implant design supports a bony construction of the intervertebral disc space. The implants consist of a cage and a pre-assembled expansion element.
SIGNUS Medizintechnik GmbH
Lumbar cage, angled
In Commercial Distribution
- 04047844066737 ()
- 37x19/10mm
CAT371910
- Metallic spinal interbody fusion cage
The VERTACONNECT TLIF Spreadable Lumbar Cage is a spacer for implantation in aprepared intervertebral disc space of the lumbar spine. Its design offers stable contact
surfaces, toothed implant/bone surfaces and large cage windows. The open implant design supports a bony construction of the intervertebral disc space. The implants consist of a cage and a pre-assembled expansion element.
SIGNUS Medizintechnik GmbH
Lumbar cage, angled
In Commercial Distribution
- 04047844066720 ()
- 37x17/10mm
CAT371710
- Metallic spinal interbody fusion cage
The VERTACONNECT TLIF Spreadable Lumbar Cage is a spacer for implantation in aprepared intervertebral disc space of the lumbar spine. Its design offers stable contact
surfaces, toothed implant/bone surfaces and large cage windows. The open implant design supports a bony construction of the intervertebral disc space. The implants consist of a cage and a pre-assembled expansion element.
SIGNUS Medizintechnik GmbH
Lumbar cage, angled
In Commercial Distribution
- 04047844066713 ()
- 37x17/8mm
CAT371708
- Metallic spinal interbody fusion cage
The VERTACONNECT TLIF Spreadable Lumbar Cage is a spacer for implantation in aprepared intervertebral disc space of the lumbar spine. Its design offers stable contact
surfaces, toothed implant/bone surfaces and large cage windows. The open implant design supports a bony construction of the intervertebral disc space. The implants consist of a cage and a pre-assembled expansion element.
SIGNUS Medizintechnik GmbH
Lumbar cage, angled
In Commercial Distribution
- 04047844066706 ()
- 37x15/8mm
CAT371508
- Metallic spinal interbody fusion cage