SEARCH RESULTS FOR: ("cryptocurrency meaning in bengali馃挷itenthusiasts.com馃挷Cryptocurrency")(1747890 results)
Only the first 10,000 results were returned. Filter these results or refine your query. Some pre-built queries with more than 10,000 results are available for download.
No Description
ANALYTICAL CONTROL SYSTEMS INC
SC-125
In Commercial Distribution
- 00817869020250 ()
SC-125
- Activated clotting time (ACT) IVD, control
No Description
ANALYTICAL CONTROL SYSTEMS INC
CR-109
In Commercial Distribution
- 00817869020007 ()
CR-109
- Calcium chloride coagulation reagent IVD
IH-Titration Solution is a dilution medium for the titer determination of antibodies in patient and donor samples for use with appropriate IH-Cards.
Bio-Rad Medical Diagnostics GmbH
813560100
In Commercial Distribution
- 07611969952205 ()
813560100
- Red cell antibody diluent IVD, reagent
LISS Solution; 2 x 100 mL bottle for Use with the IH-System
Bio-Rad Medical Diagnostics GmbH
813520100
In Commercial Distribution
- 07611969952182 ()
- Low ionic-strength salt solution (LISS) immunohaematology reagent IVD
IH-Titration Rack is a rack with empty wells for plasma/serum dilution used with the IH-500.
Bio-Rad Medical Diagnostics GmbH
813550100
In Commercial Distribution
- 07611969964505 ()
813550100
- Assay container IVD, single-use
The SonACT Kit is an in vitro diagnostic reagent for use with the Sonoclot® Coagulation & Platelet Function Analyzer System. The SonACT test is a celite activated whole blood clotting time test. It may also be used with citrated whole blood and plasma.
The SonACT Kit is intended for general purpose global hemostasis monitoring including: clot detection, fibrin formation, platelet function, and hyperfibrinolysis. The monitoring information is typically used for anticoagulant management up to high heparin levels (0 to approximately 6 units per ml), hypercoagulable and/or hypocoagulable screening, platelet function assessment, and hyperfibrinolysis screening. When used with the Sonoclot Analyzer System, the SonACT test provides quantitative Onset/ACT and Clot Rate results as well as qualitative and quantitative information on the Sonoclot Signature including: fibrin formation, platelet function, and hyperfibrinolysis.
Each kit contains 100 lidded colorless plastic activation cuvettes, 100 probes, and instructions for use. The activation cuvettes contain a controlled amount of celite and a magnetic stir bar.
SIENCO, INC.
800-0432
In Commercial Distribution
- B55880004320 ()
- B55880004321 ()
800-0432
- Multiple coagulation factor IVD, kit, clotting
The Reference Plasma Quality Control Kit is for use with the Sonoclot® Analyzer System to verify performance of activated cuvettes. Testing should be performed prior to the use of a new shipment of activated cuvettes and monthly throughout use of the stock. More frequent testing may be required to comply with local, state and federal QC requirements.
Reference plasma quality control is important to properly verify proper performance of coagulation test activators. A two level testing approach is used to perform quality control of the activator used in an activated coagulation test. Level I is run with the activator on the reference plasma. Level II is run with the non-activated test on the reference plasma. These two tests confirm the effectiveness of the activator to perform its intended coagulation activation.
Each Kit contains:
1 vial Reference Plasma Control - 6 ml vial containing a lyophilized preparation of citrated animal plasma, stabilizers and buffer. Contains no human material.
1 vial Distilled Water - 6 ml vial containing 5.0 ml laboratory grade distilled water.
1 vial 0.02 M Calcium Chloride - 6 ml vial containing 5.0 ml 0.02 M Calcium Chloride.
5 plastic 1 ml syringes
2 non-activated test cuvettes (blue with clear caps, stir bars, and probes)
SIENCO, INC.
900-1318
In Commercial Distribution
- B55890013181 ()
900-1318
- Multiple coagulation factor IVD, control
The Reference Viscosity Oil QC test is a simple means of verifying proper operation of the Sonoclot Analyzer.
This test consists of a two point verification of the electromechanical oscillator and also ensures that the heating control is operating accurately. The two verification points are: 1) Probe-In-Air, and 2) Probe-In-Oil. The Probe-In-Air is the response of the electromechanical oscillator to air. The Probe-In-Oil is the response of the electromechanical oscillator to the reference viscosity liquid. Since the viscosity of the reference viscosity fluid is significantly temperature dependent, the Probe-In-Oil test point also verifies the temperature regulation.
The QC test should be run each day the Sonoclot Analyzer is used or as required by your institution.
Each Reference Viscosity Quality Control Kit contains 24 cuvettes, 24 probes, 1 vial of reference viscosity oil with end cap, and these instructions. These supplies provide 24 QC tests for the analyzer.
SIENCO, INC.
900-1302
In Commercial Distribution
- B55890013020 ()
- B55890013021 ()
900-1302
- Multiple coagulation factor IVD, control
The SonACT Kit is an in vitro diagnostic reagent for use with the Sonoclot® Coagulation & Platelet Function Analyzer System. The SonACT test is a celite activated whole blood clotting time test. It may also be used with citrated whole blood and plasma.
The SonACT Kit is intended for general purpose global hemostasis monitoring including: clot detection, fibrin formation, platelet function, and hyperfibrinolysis. The monitoring information is typically used for anticoagulant management up to high heparin levels (0 to approximately 6 units per ml), hypercoagulable and/or hypocoagulable screening, platelet function assessment, and hyperfibrinolysis screening. When used with the Sonoclot Analyzer System, the SonACT test provides quantitative Onset/ACT and Clot Rate results as well as qualitative and quantitative information on the Sonoclot Signature including: fibrin formation, platelet function, and hyperfibrinolysis.
Each kit contains 24 lidded colorless plastic activation cuvettes, 24 probes, and instructions for use. The activation cuvettes contain a controlled amount of celite and a magnetic stir bar.
SIENCO, INC.
800-0431
In Commercial Distribution
- B55880004310 ()
- B55880004311 ()
800-0431
- Multiple coagulation factor IVD, kit, clotting
The Non-Activated Clotting Test Kit contains the necessary components for an in vitro diagnostic test for use with the Sonoclot® Coagulation & Platelet Function Analyzer System. It may be used with native whole blood, citrated whole blood, and plasma.
The Non-Activated Kit may either be used as a non-activated clotting test or as a general use test with user provided activators. It is intended for customer designed hemostasis monitoring on the Sonoclot Analyzer. The Non-Activated cuvette allows for coagulation monitoring using tissue activation, thrombin activation, and other custom activators. Some of the applications for the Non-Activated test with the addition of customer determined reagents are monitoring of fibrin formation, fibrinolysis, hyperfibrinolysis and clot retraction.
When used with the Sonoclot Analyzer System, the Non-Activated test provides quantitative Onset/ACT and Clot Rate results as well as qualitative and quantitative information on the Sonoclot Signature including: fibrin formation, platelet function, and hyperfibrinolysis.
Each kit contains 24 lidded plastic cuvettes, 24 probes, and instructions for use. The cuvettes contain a magnetic stir bar.
SIENCO, INC.
800-0426
In Commercial Distribution
- B55880004260 ()
- B55880004261 ()
800-0426
- Multiple coagulation factor IVD, kit, clotting