SEARCH RESULTS FOR: (*cvs Heating pads*)(11956 results)
Only the first 10,000 results were returned. Filter these results or refine your query. Some pre-built queries with more than 10,000 results are available for download.
CM2 220, THERAPY HAMMER,LASER MODULE, AUTOSOUND, 2X2 MS FOAM, LEAD CORDS, 5CM GELSHOTS & ADAPTOR
COMPASS HEALTH BRANDS CORP.
410-010-220
Not in Commercial Distribution
- 00852515007599 ()
- Transcutaneous electrical stimulation electrode, single-use
- Physical therapy ultrasound system applicator, hand-held
- Physical therapy ultrasound/neuromuscular stimulation system
- Ultrasound coupling pad holder
Self-adhesive Replacement Gel Pads
WOONSOCKET PRESCRIPTION CENTER, INCORPORATED
MDPS100
In Commercial Distribution
- 00050428381250 ()
- 10050428381257 ()
- Transcutaneous electrical stimulation probe
The Vasoview Hemopro 3 Endoscopic Vessel Harvesting System is designed for use in conjunction with the 7 mm Endoscope. The Harvesting Cannula has four lumens which house the Endoscope, C-Ring, distal lens washer tube and Vasoview Hemopro 3 Harvesting Tool for cutting and cauterization of vessel branches. The C-Ring with the built-in distal lens washer is independently controlled by a C-Ring Slider on the handle of the Harvesting Cannula. The C-Ring cradles the vessel and delivers the saline that washes the distal tip of the Endoscope.
The Harvesting Tool can be inserted, removed, rotated, extended, and retracted from the main Harvesting Cannula through the Tool Adapter Port.
The Harvesting Tool is powered by direct current (DC) only; it does not utilize RF (radio frequency) energy. The Harvesting Tool cuts and cauterizes through a process of heat and pressure. The Harvesting Tool has two curved Jaws. One of the Jaws contains the heating elements for branch cutting and cauterization and spot cautery. There are three heating elements: two cauterization elements and a cutting element between them. Both Jaws have insulation protecting the adjacent tissue. The concave side of the Jaws has a larger buffer of insulation and therefore should be positioned toward sensitive tissue during Jaw activation. An area near the tip of the convex side of the Jaw can be used for spot cautery to cauterize tissue contacted by that area of the Jaw.
The Activation Toggle is used to control the Jaws and to activate the heating elements. Positioning of the device, cutting, and cauterization are performed under endoscopic visualization. This device is intended for specific use with the Vasoview Hemopro Power Supply and Vasoview Hemopro 3 Power Adapter.
MAQUET CARDIOVASCULAR LLC
VH-6001
In Commercial Distribution
- 00607567701335 ()
VH-6001
- Flexible endoscopic scissors, reusable
The Vasoview Hemopro 3 Endoscopic Vessel Harvesting System is designed for use in conjunction with the 7 mm Endoscope. The Harvesting Cannula has four lumens which house the Endoscope, C-Ring, distal lens washer tube and Vasoview Hemopro 3 Harvesting Tool for cutting and cauterization of vessel branches. The C-Ring with the built-in distal lens washer is independently controlled by a C-Ring Slider on the handle of the Harvesting Cannula. The C-Ring cradles the vessel and delivers the saline that washes the distal tip of the Endoscope.
The Harvesting Tool can be inserted, removed, rotated, extended, and retracted from the main Harvesting Cannula through the Tool Adapter Port.
The Harvesting Tool is powered by direct current (DC) only; it does not utilize RF (radio frequency) energy. The Harvesting Tool cuts and cauterizes through a process of heat and pressure. The Harvesting Tool has two curved Jaws. One of the Jaws contains the heating elements for branch cutting and cauterization and spot cautery. There are three heating elements: two cauterization elements and a cutting element between them. Both Jaws have insulation protecting the adjacent tissue. The concave side of the Jaws has a larger buffer of insulation and therefore should be positioned toward sensitive tissue during Jaw activation. An area near the tip of the convex side of the Jaw can be used for spot cautery to cauterize tissue contacted by that area of the Jaw.
The Activation Toggle is used to control the Jaws and to activate the heating elements. Positioning of the device, cutting, and cauterization are performed under endoscopic visualization. This device is intended for specific use with the Vasoview Hemopro Power Supply and Vasoview Hemopro 3 Power Adapter.
MAQUET CARDIOVASCULAR LLC
VH-6020
Not in Commercial Distribution
- 00607567701298 ()
VH-6020
- Flexible endoscopic scissors, reusable
The Vasoview Hemopro 3 Endoscopic Vessel Harvesting System is designed for use in conjunction with the 7 mm Endoscope. The Harvesting Cannula has four lumens which house the Endoscope, C-Ring, distal lens washer tube and Vasoview Hemopro 3 Harvesting Tool for cutting and cauterization of vessel branches. The C-Ring with the built-in distal lens washer is independently controlled by a C-Ring Slider on the handle of the Harvesting Cannula. The C-Ring cradles the vessel and delivers the saline that washes the distal tip of the Endoscope.
The Harvesting Tool can be inserted, removed, rotated, extended, and retracted from the main Harvesting Cannula through the Tool Adapter Port.
The Harvesting Tool is powered by direct current (DC) only; it does not utilize RF (radio frequency) energy. The Harvesting Tool cuts and cauterizes through a process of heat and pressure. The Harvesting Tool has two curved Jaws. One of the Jaws contains the heating elements for branch cutting and cauterization and spot cautery. There are three heating elements: two cauterization elements and a cutting element between them. Both Jaws have insulation protecting the adjacent tissue. The concave side of the Jaws has a larger buffer of insulation and therefore should be positioned toward sensitive tissue during Jaw activation. An area near the tip of the convex side of the Jaw can be used for spot cautery to cauterize tissue contacted by that area of the Jaw.
The Activation Toggle is used to control the Jaws and to activate the heating elements. Positioning of the device, cutting, and cauterization are performed under endoscopic visualization. This device is intended for specific use with the Vasoview Hemopro Power Supply and Vasoview Hemopro 3 Power Adapter.
MAQUET CARDIOVASCULAR LLC
VH-6000
In Commercial Distribution
- 00607567701274 ()
VH-6000
- Flexible endoscopic scissors, reusable
RevLight is a device that utilizes Light Emitting Diodes to provide LED light to the body. The base unit contains the power supplies, the control unit, and sets of Pulsators that deliver the light to the skin. The output of the Pulsators ranges from 420-940nm. RevLight is intended for use to provide LED light to the body. Depending on the wavelength(s) of light delivered by the Pulsators, RevLight is:
1. generally indicated to treat dermatological conditions and specifically indicated to treat moderate inflammatory acne vulgaris (Blue Pulsators); and
2. generally indicated to provide topical heating to promote increased blood flow, relaxation of muscle and relief of pain (Amber/Red Pulsators).
SUBCON MANUFACTURING CORP
1030
Not in Commercial Distribution
- B82110300 ()
1030
- Cosmetic red-light phototherapy system, professional
RevLight is a device that utilizes Light Emitting Diodes to provide LED light to the body. The base unit contains the power supplies, the control unit, and sets of Pulsators that deliver the light to the skin. The output of the Pulsators ranges from 420-940nm. RevLight is intended for use to provide LED light to the body. Depending on the wavelength(s) of light delivered by the Pulsators, RevLight is:
1. generally indicated to treat dermatological conditions and specifically indicated to treat moderate inflammatory acne vulgaris (Blue Pulsators); and
2. generally indicated to provide topical heating to promote increased blood flow, relaxation of muscle and relief of pain (Amber/Red Pulsators).
SUBCON MANUFACTURING CORP
1000
Not in Commercial Distribution
- B82110000 ()
1000
- Cosmetic red-light phototherapy system, professional
The lnMode RF System generating RF energy with integral temperature and impedance feedback mechanism for procedures requiring electrocoagulation/contraction of soft tissue and hemostasis. The InMode RF System constantly monitors the temperature and impedance of the target treatment tissue, automatically adjusting energy delivery to maintain effective and safe tissue heating.
The lnMode RF System consists of an AC/DC power supply unit, RF generator, controller and user interface including touch screen. The RF handpiece is connected to the console via a cable and a foot switch activates the energy delivery to the hand piece. The handpiece is comprised of a disposable, single use plastic handle with internal and external electrodes.
INMODE M.D LTD
AG604881A
In Commercial Distribution
- 07290016633368 ()
AG606972A
- Multi-modality skin surface treatment system
The Geri Embryo Incubator is a benchtop incubator with six modular incubation chambers each with its own temperature control capability and separate gas inlet feed. Each chamber contains heating elements in its lid and base, together with an orange light source (591 nm) and camera with integrated optics that
take time-lapse images of embryos and allows operators to view embryos without removing them from the incubation chamber. Inside each chamber is a filter used to filter the gas mixture entering the incubation chamber from the gas supply. The gas is supplied from standard premixed medical gas cylinders.
The Geri Embryo Incubator includes firmware to control the incubator settings, and software to control patient information and settings.
GENEA BIOMEDX PTY LTD
GERI-INS-01
In Commercial Distribution
- 09348265003000 ()
- Assisted reproduction heater/incubator
The LaserShot M is a static laser system where the embryo is moved to the laser by moving the stage of the microscope. The LaserShot M components include a laser module (1.48 microm infrared diode laser, class 1M), laser adapter to connect to the microscope, mirror block, laser objective (25 times), USB camera, Eye Ware Software, and an optional target pointer and foot switch. The EyeWare software controls the device components, operates the laser, and takes images and records videos of embryo undergoing laser procedures. The software determines how many holes are drilled along this line and controls/restricts laser firing parameters to minimize localized heating of the embryo during these procedures. These laser devices have been designed to be fitted to compatible inverted microscopes.
Octax Microscience GmbH
19310/0148M
In Commercial Distribution
- 04260604170011 ()
19310/0148M
- Assisted reproduction laser system