SEARCH RESULTS FOR: 深圳龙岗区本帮菜（V电✅16511000789老李✅）【快速安排】最靠谱的外围模特经纪fxXr8sod763(2313 results)
No Description
FLEXICARE MEDICAL LIMITED
038-01-862U
In Commercial Distribution
- 05055788775027 ()
- Anaesthesia breathing circuit, single-use
Adept (4% icodextrin solution) is a single use, sterile, clear, colorless to pale yellow
fluid for intraperitoneal administration, containing icodextrin at a concentration of 4%
w/v in an electrolyte solution, presented in a flexible polyvinylchloride bag.
Adept is indicated for use intraperitoneally as an adjunct to good surgical technique for
the reduction of post-surgical adhesions in patients undergoing gynecological
laparoscopic adhesiolysis.
BAXTER INTERNATIONAL INC.
0600041
In Commercial Distribution
- 00085412086217 ()
- 50085412086212 ()
- Total Volume: 1500 Milliliter
0600041
- Surgical anti-adhesion material, implantable, bioabsorbable, non-medicated
Welch Allyn Green Series 777 Integrated Wall Diagnostic System including mounting bracket for Connex Spot Monitor Device (order CSM device separately), PanOptic Ophthalmoscope with Cobalt-Blue Filter and Corneal Viewing Lens (#11820), MacroView Otoscope (#23810), KleenSpec Disposable Specula Dispenser, Vital Signs Accessory Basket, Vital Signs Monitor Power Supply (7000-PS), Wall-Mount Panel (34 x 12 in / 86.4 x 30.5 cm); 100-240 V, 50-60 Hz AC, IEC Plug Type-B
WELCH ALLYN, INC.
901027
In Commercial Distribution
- 00732094230604 ()
77794-2MCSM
- Aneroid manual sphygmomanometer
Sterile Disposable Endocavity Needle Guide Kit for use with: Chison D7C10L & V7-E, Esaote E8-5 R10, International Biomedical E717, Kretz PB-ER4-9ES, Mindray EV6.5 MHZ/R10, 6CV1, 6CV1s, 65EC10EA, 65EC10EB, 65EC10HA, CB10-4, CB10-HS, V10-4, V10-4B, V10-4BS, V10-4S, V11-3E, V11-3WE & V11-3WS,Samsung Medison EC4-9IS, EC4-9ES, ER4-9ES, & 10R EV/140D, Siemens 6.5 EC10, EC7, EC9-4 (Sonoline G20, G50S & Acuson X500 Ultrasound Systems), & EV9-4 (Acuson X500 Ultrasound System), Supersonic Imagine SuperEndocavity SE12-3 & SEV12-3, Terason 8EC4(V), Vermon E710, and Zonare E9-3
PROTEK MEDICAL PRODUCTS, INC.
9005
In Commercial Distribution
- 10841912105264 ()
- 00841912105267 ()
9005
- Body-orifice ultrasound imaging transducer cover, basic
- Needle guide, single-use
The MOR is a self-tapping, small diameter, screw implant, manufactured from titanium alloy (6% Al, 4% V – ASTM F136). The portion of the implant that is submerged in the bone is grit blasted and acid etched. The implants are manufactured with two body diameters, 2.1 mm and 2.4 mm. They are packaged sterile in a double blister, which contains: the implant in a titanium tube. The MOR implant body is designed with an O-ball denture connection and a separate straight titanium alloy (6% AI, 4% V – ASTM F136) abutment which may be cemented over the O-ball for crown or bridge fixation.
The MOR Implant System is not intended for correction of implants placed at an angle. It is only intended for use with straight abutments. The MOR implant body is intended to be placed such that no angle correction is necessary.
It is intended for long-term applications in the bone of the patient’s upper or lower arch. The MOR implants may also be used for inter-radicular transitional applications.
These devices will permit immediate splinting stability and long-term fixation of new or existing crown and bridge installations, for full or partial edentulous cases, and employing minimally invasive surgical intervention.
STERNGOLD DENTAL LLC
901493
In Commercial Distribution
- 00841549108273 ()
- Screw endosteal dental implant, one-piece
The MOR is a self-tapping, small diameter, screw implant, manufactured from titanium alloy (6% Al, 4% V – ASTM F136). The portion of the implant that is submerged in the bone is grit blasted and acid etched. The implants are manufactured with two body diameters, 2.1 mm and 2.4 mm. They are packaged sterile in a double blister, which contains: the implant in a titanium tube. The MOR implant body is designed with an O-ball denture connection and a separate straight titanium alloy (6% AI, 4% V – ASTM F136) abutment which may be cemented over the O-ball for crown or bridge fixation.
The MOR Implant System is not intended for correction of implants placed at an angle. It is only intended for use with straight abutments. The MOR implant body is intended to be placed such that no angle correction is necessary.
It is intended for long-term applications in the bone of the patient’s upper or lower arch. The MOR implants may also be used for inter-radicular transitional applications.
These devices will permit immediate splinting stability and long-term fixation of new or existing crown and bridge installations, for full or partial edentulous cases, and employing minimally invasive surgical intervention.
STERNGOLD DENTAL LLC
901492
In Commercial Distribution
- 00841549108266 ()
- Screw endosteal dental implant, one-piece
The MOR is a self-tapping, small diameter, screw implant, manufactured from titanium alloy (6% Al, 4% V – ASTM F136). The portion of the implant that is submerged in the bone is grit blasted and acid etched. The implants are manufactured with two body diameters, 2.1 mm and 2.4 mm. They are packaged sterile in a double blister, which contains: the implant in a titanium tube. The MOR implant body is designed with an O-ball denture connection and a separate straight titanium alloy (6% AI, 4% V – ASTM F136) abutment which may be cemented over the O-ball for crown or bridge fixation.
The MOR Implant System is not intended for correction of implants placed at an angle. It is only intended for use with straight abutments. The MOR implant body is intended to be placed such that no angle correction is necessary.
It is intended for long-term applications in the bone of the patient’s upper or lower arch. The MOR implants may also be used for inter-radicular transitional applications.
These devices will permit immediate splinting stability and long-term fixation of new or existing crown and bridge installations, for full or partial edentulous cases, and employing minimally invasive surgical intervention.
STERNGOLD DENTAL LLC
901491
In Commercial Distribution
- 00841549108259 ()
- Screw endosteal dental implant, one-piece
The MOR is a self-tapping, small diameter, screw implant, manufactured from titanium alloy (6% Al, 4% V – ASTM F136). The portion of the implant that is submerged in the bone is grit blasted and acid etched. The implants are manufactured with two body diameters, 2.1 mm and 2.4 mm. They are packaged sterile in a double blister, which contains: the implant in a titanium tube. The MOR implant body is designed with an O-ball denture connection and a separate straight titanium alloy (6% AI, 4% V – ASTM F136) abutment which may be cemented over the O-ball for crown or bridge fixation.
The MOR Implant System is not intended for correction of implants placed at an angle. It is only intended for use with straight abutments. The MOR implant body is intended to be placed such that no angle correction is necessary.
It is intended for long-term applications in the bone of the patient’s upper or lower arch. The MOR implants may also be used for inter-radicular transitional applications.
These devices will permit immediate splinting stability and long-term fixation of new or existing crown and bridge installations, for full or partial edentulous cases, and employing minimally invasive surgical intervention.
STERNGOLD DENTAL LLC
901489
In Commercial Distribution
- 00841549108235 ()
- Screw endosteal dental implant, one-piece
The MOR is a self-tapping, small diameter, screw implant, manufactured from titanium alloy (6% Al, 4% V – ASTM F136). The portion of the implant that is submerged in the bone is grit blasted and acid etched. The implants are manufactured with two body diameters, 2.1 mm and 2.4 mm. They are packaged sterile in a double blister, which contains: the implant in a titanium tube. The MOR implant body is designed with an O-ball denture connection and a separate straight titanium alloy (6% AI, 4% V – ASTM F136) abutment which may be cemented over the O-ball for crown or bridge fixation.
The MOR Implant System is not intended for correction of implants placed at an angle. It is only intended for use with straight abutments. The MOR implant body is intended to be placed such that no angle correction is necessary.
It is intended for long-term applications in the bone of the patient’s upper or lower arch. The MOR implants may also be used for inter-radicular transitional applications.
These devices will permit immediate splinting stability and long-term fixation of new or existing crown and bridge installations, for full or partial edentulous cases, and employing minimally invasive surgical intervention.
STERNGOLD DENTAL LLC
901488
In Commercial Distribution
- 00841549108228 ()
- Screw endosteal dental implant, one-piece
The MOR is a self-tapping, small diameter, screw implant, manufactured from titanium alloy (6% Al, 4% V – ASTM F136). The portion of the implant that is submerged in the bone is grit blasted and acid etched. The implants are manufactured with two body diameters, 2.1 mm and 2.4 mm. They are packaged sterile in a double blister, which contains: the implant in a titanium tube. The MOR implant body is designed with an O-ball denture connection and a separate straight titanium alloy (6% AI, 4% V – ASTM F136) abutment which may be cemented over the O-ball for crown or bridge fixation.The MOR Implant System is not intended for correction of implants placed at an angle. It is only intended for use with straight abutments. The MOR implant body is intended to be placed such that no angle correction is necessary. It is intended for long-term applications in the bone of the patient’s upper or lower arch. The MOR implants may also be used for inter-radicular transitional applications. These devices will permit immediate splinting stability and long-term fixation of new or existing crown and bridge installations, for full or partial edentulous cases, and employing minimally invasive surgical intervention.
STERNGOLD DENTAL LLC
901490
In Commercial Distribution
- 00841549108242 ()
- Screw endosteal dental implant, one-piece