SEARCH RESULTS FOR: ("cryptocurrency meaning in bengali馃挷itenthusiasts.com馃挷Cryptocurrency")(1600631 results)
Only the first 10,000 results were returned. Filter these results or refine your query. Some pre-built queries with more than 10,000 results are available for download.
Integra VolTAC Antimicrobial Wound Dressing is a single layer dressing. VolTAC consists of a polyester substrate containing elemental silver and zinc applied on the surface in a dot-matrix pattern. In the presence of a conductive medium (e.g. wound exudate, water-based wound hydrogel, sterile saline or sterile water), silver and zinc in the dressing generate microcurrents at the dressing surface which helps preserve the dressing and minimizes or prevents the growth of microorganisms within the dressing.
Integra Lifesciences Corporation
VOLS0205
In Commercial Distribution
- 30381780257879 ()
- 10381780257875 ()
- Dressing Size: 2x5 in (5x12.5 cm)
- Adhesive bandage
Integra VolTAC Antimicrobial Wound Dressing is a single layer dressing. VolTAC consists of a polyester substrate containing elemental silver and zinc applied on the surface in a dot-matrix pattern. In the presence of a conductive medium (e.g. wound exudate, water-based wound hydrogel, sterile saline or sterile water), silver and zinc in the dressing generate microcurrents at the dressing surface which helps preserve the dressing and minimizes or prevents the growth of microorganisms within the dressing.
Integra Lifesciences Corporation
VOLS0202
In Commercial Distribution
- 30381780257862 ()
- 10381780257868 ()
- Dressing Size: 2x2 in (5x5 cm)
- Adhesive bandage
Eccentric Glenosphere is used in the Titan™ Reverse Shoulder System to allow for optimal soft tissue tensioning, maximize stability, increase range of motion and minimize scapular notching.
Ascension Orthopedics, Inc.
GLS096005E
In Commercial Distribution
- M269GLS096005E1 ()
- 10381780121664 ()
- 1.130 in H; Size 5 mm
GLS-0960-05E
- Reverse shoulder prosthesis head
Concentric Glenosphere is used in the Titan™ Reverse Shoulder System to allow for optimal soft tissue tensioning, maximize stability, increase range of motion and minimize scapular notching.
Ascension Orthopedics, Inc.
GLS096005C
In Commercial Distribution
- M269GLS096005C1 ()
- 10381780121640 ()
- 1.130 in H; Size 5 mm
GLS-0960-05C
- Reverse shoulder prosthesis head
The Ascension® NuGrip® is an uncemented, one-component prosthesis for the basal thumb joint. It has a proximal head that articulates against the trapezium, a planar collar that provides for a simple planar bone resection, and an anatomic shaped stem that is press fit into the canal of the first metacarpal following resection of the base. It is fabricated from a thick pyrocarbon layer encasing a graphite core that is impregnated with one-atomic percent tungsten so it is radiopaque. The Ascension® NuGrip® is intended to replace the proximal end of the first metacarpal in cases of rheumatoid arthritis, traumatic arthritis, osteoarthritis or post fracture deformation or bone loss which present as either a painful, unstable thumb, or a thumb with limited range of motion.
Ascension Orthopedics, Inc.
NUG44330S
In Commercial Distribution
- 10381780120117 ()
- M268NUG44330S1 ()
- 1.195 in L; Size 30 S
NUG-443-30S
- Metacarpal prosthesis
The Ascension® NuGrip® is an uncemented, one-component prosthesis for the basal thumb joint. It has a proximal head that articulates against the trapezium, a planar collar that provides for a simple planar bone resection, and an anatomic shaped stem that is press fit into the canal of the first metacarpal following resection of the base. It is fabricated from a thick pyrocarbon layer encasing a graphite core that is impregnated with one-atomic percent tungsten so it is radiopaque. The Ascension® NuGrip® is intended to replace the proximal end of the first metacarpal in cases of rheumatoid arthritis, traumatic arthritis, osteoarthritis or post fracture deformation or bone loss which present as either a painful, unstable thumb, or a thumb with limited range of motion.
Ascension Orthopedics, Inc.
NUG44330M
In Commercial Distribution
- 10381780120100 ()
- M268NUG44330M1 ()
- 1.261 in L; Size 30 M
NUG-443-30M
- Metacarpal prosthesis
The Ascension® NuGrip® is an uncemented, one-component prosthesis for the basal thumb joint. It has a proximal head that articulates against the trapezium, a planar collar that provides for a simple planar bone resection, and an anatomic shaped stem that is press fit into the canal of the first metacarpal following resection of the base. It is fabricated from a thick pyrocarbon layer encasing a graphite core that is impregnated with one-atomic percent tungsten so it is radiopaque. The Ascension® NuGrip® is intended to replace the proximal end of the first metacarpal in cases of rheumatoid arthritis, traumatic arthritis, osteoarthritis or post fracture deformation or bone loss which present as either a painful, unstable thumb, or a thumb with limited range of motion.
Ascension Orthopedics, Inc.
NUG44330L
In Commercial Distribution
- 10381780120094 ()
- M268NUG44330L1 ()
- 1.313 in L; Size 30 L
NUG-443-30L
- Metacarpal prosthesis
The Ascension® NuGrip® is an uncemented, one-component prosthesis for the basal thumb joint. It has a proximal head that articulates against the trapezium, a planar collar that provides for a simple planar bone resection, and an anatomic shaped stem that is press fit into the canal of the first metacarpal following resection of the base. It is fabricated from a thick pyrocarbon layer encasing a graphite core that is impregnated with one-atomic percent tungsten so it is radiopaque. The Ascension® NuGrip® is intended to replace the proximal end of the first metacarpal in cases of rheumatoid arthritis, traumatic arthritis, osteoarthritis or post fracture deformation or bone loss which present as either a painful, unstable thumb, or a thumb with limited range of motion.
Ascension Orthopedics, Inc.
NUG44320S
In Commercial Distribution
- 10381780120087 ()
- M268NUG44320S1 ()
- 1.081 in L; Size 20 S
NUG-443-20S
- Metacarpal prosthesis
The Ascension® NuGrip® is an uncemented, one-component prosthesis for the basal thumb joint. It has a proximal head that articulates against the trapezium, a planar collar that provides for a simple planar bone resection, and an anatomic shaped stem that is press fit into the canal of the first metacarpal following resection of the base. It is fabricated from a thick pyrocarbon layer encasing a graphite core that is impregnated with one-atomic percent tungsten so it is radiopaque. The Ascension® NuGrip® is intended to replace the proximal end of the first metacarpal in cases of rheumatoid arthritis, traumatic arthritis, osteoarthritis or post fracture deformation or bone loss which present as either a painful, unstable thumb, or a thumb with limited range of motion.
Ascension Orthopedics, Inc.
NUG44320M
In Commercial Distribution
- 10381780120070 ()
- M268NUG44320M1 ()
- 1.147 in L; Size 20 M
NUG-443-20M
- Metacarpal prosthesis
The Ascension® NuGrip® is an uncemented, one-component prosthesis for the basal thumb joint. It has a proximal head that articulates against the trapezium, a planar collar that provides for a simple planar bone resection, and an anatomic shaped stem that is press fit into the canal of the first metacarpal following resection of the base. It is fabricated from a thick pyrocarbon layer encasing a graphite core that is impregnated with one-atomic percent tungsten so it is radiopaque. The Ascension® NuGrip® is intended to replace the proximal end of the first metacarpal in cases of rheumatoid arthritis, traumatic arthritis, osteoarthritis or post fracture deformation or bone loss which present as either a painful, unstable thumb, or a thumb with limited range of motion.
Ascension Orthopedics, Inc.
NUG44310S
In Commercial Distribution
- 10381780120063 ()
- M268NUG44310S1 ()
- 1.019 in L; Size 10 S
NUG-443-10S
- Metacarpal prosthesis