SEARCH RESULTS FOR: ("NWSE MAPS")(205 results)

Connection Box - Stockert™

Mapping System

Workstation PC

ECG OUT Box

ECG OUT Box

Breakout Box

Mapping System

IntellaNav™ CB - Maestro™

ECG Out Box and Cable Kit 1 US

Rhythmia Global Install Bundle

No Description

Mapping System

Ablation Connection Box (SmartAblate)

Ablation Connection Box (IBI/Ampere)

Ablation Connection Box (Maestro™)

MAPPING SYSTEM CIT200 US

CART AFR-00013 SYSTEM US

MAPPING SYSTEM AFR-00003 US

RecordConnect Module Recording System Connector

Includes GRIP2-High, GRIP2-Mid, GRIP2-Low and GRIP2 Maps, and 2 Grip 4256E Sensors

Includes 1 Evolution Handle, I-Scan Software CD with 2 K-Scan Sensor maps, Sensor Carrying Case, System Carrying Case, and System Manual. 1 Day of Training (USA Only). Sensor selection: Choice of up to 5 sensors corresponding to the maps chosen above (value up to $1,000)

Includes 2 F-Scan64 Cuffs, 1 Bluetooth Dongle, 2 Power Supply and AC Cords, F-Scan64 Software with all F-Scan64 sensor maps, 2 Velcro Cuff Straps, and F-Scan64 Sensors

SyMRI is a post-processing software medical device intended for use in visualization of soft tissue. SyMRI analyzes input data from MR imaging systems. SyMRI utilizes data from supported MR sequences to generate parametric maps of R1, R2 relaxation rates, and proton density (PD). SyMRI is intended for automatic labeling, visualization and volumetric quantification of segmentable brain tissues from a set of MR images. Brain tissue volumes are determined based on modeling of parametric maps from SyMRI. When interpreted by a trained physician, the parametric maps, tissue maps, and volumetrics from SyMRI can provide information useful in determining diagnosis. SyMRI is indicated for head imaging. SyMRI can also generate multiple contrast weighted images from the parametric maps generated by post-processing data from M2D-MDME sequence. SyMRI enables post-acquisition image contrasts adjustments from acquisition using M2D-MDME sequence. When M2D-MDME acquisition data is used as input to SyMRI the synthetic contrast weighted images can also provide information useful in determining diagnosis. SyMRI is intended to be used in combination with at least one other, conventional MR acquisition (e.g. T2-FLAIR).

The Ox-Imager CS™ is intended for use by healthcare professionals as a noninvasive tissue oxygenation measurement system that maps value of: oxygen saturation, oxy-hemoglobin, and deoxy-hemoglobin into 2D/3D visual presentations.

Includes 2 Evolution Handles, CONFORMat Clinical Software CD with 5330, 5331, and 5330_5331 Maps, (1) 5330-5 and (1) 5331-5 Sensors, System Carrying Case, Sensor Carrying Tube, Quick Start Guide, 1 Web-based Training Session (USA Only)

SyMRI is a post-processing software medical device intended for use in visualization of the brain. SyMRI analyzes input data from MR imaging systems. SyMRI utilizes data from a multi-delay, multi-echo acquisition (MDME) to generate parametric maps of R1, R2 relaxation rates, and proton density (PD). SyMRI can generate multiple image contrasts from the parametric maps. SyMRI enables post-acquisition image contrast adjustment. SyMRI is indicated for head imaging. SyMRI is also intended for automatic labeling, visualization and volumetric quantification of segmentable brain tissues from a set of MR images. Brain tissue volumes are determined based on modeling of parametric maps from MDME images. When interpreted by a trained physician, SyMRI images can provide information useful in determining diagnosis. SyMRI should always be used in combination with at least one other, conventional MR acquisition (e.g. T2-FLAIR).

Includes 2 Evolution Handles, (1) 4-Port Powered USB Hub, CONFORMat Clinical Software CD with CONFORMat and CONFORMat Dual Maps, Help File and PDF of System Manual, (2) 5330 Sensors, System Carrying Case, Sensor Carrying Tube, Quick Start Guide, and 1 Training Session (USA Only)

SyMRI is a post-processing software medical device intended for use in visualization of the brain. SyMRI analyzes input data from MR imaging systems. SyMRI utilizes data from a multi-delay, multi-echo acquisition (MDME) to generate parametric maps of R1, R2 relaxation rates, and proton density (PD). SyMRI can generate multiple image contrasts from the parametric maps. SyMRI enables post-acquisition image contrast adjustment. SyMRI is indicated for head imaging. When interpreted by a trained physician, SyMRI images can provide information useful in determining diagnosis. SyMRI should always be used in combination with at least one other, conventional MR acquisition (e.g. T2-FLAIR).

SyMRI is a post-processing software medical device intended for use in visualization of soft tissue. SyMRI analyzes input data from MR imaging systems. SyMRI utilizes data from supported MR sequences to generate parametric maps of R1, R2 relaxation rates, and proton density (PD). SyMRI is intended for automatic labeling, visualization and volumetric quantification of segmentable brain tissues from a set of MR images. Brain tissue volumes are determined based on modeling of parametric maps from SyMRI. SyMRI can also generate multiple image contrasts from the parametric maps. SyMRI enables post-acquisition image contrast adjustment. SyMRI is indicated for head imaging. When interpreted by a trained physician, output from SyMRI can provide information useful in determining diagnosis. SyMRI 2D is intended to be used in combination with at least one other, conventional MR acquisition (e.g. T2-FLAIR). T1W and T2W images from SyMRI 3D may replace conventional MR images in a clinical setting when interpreting together with a conventional 3D T2W FLAIR image.

Functional MR V1.0 is an optional image processing software application that is intended for use on Olea Sphere® V3.0 software package. It is intended to be used by trained professionals including, but not limited to, physicians, MR technicians, radiographers. Functional MR V1.0 includes a software module that computes the activation map from a BOLD sequence and supports the visualization, analysis of activation maps. Functional MR V1.0 can also be used to provide reproducible measurements of derived maps. These measurements include thresholds modification and ROI analysis. Functional MR V1.0 may also be used as an image viewer of multi-modality digital images, including BOLD and DTI images.

Includes 2 VersaTek Cuffs, 1 VersaTek 2-Port Hub, Power Supply and AC Cord, CONFORMat Clinical Software CD with CONFORMat and CONFORMat Dual Maps, Help File and PDF of System Manual, (2) 5330E Sensors, 10 ft. USB Cable, (2) 25 ft. Cuff Cables, System Carrying Case, Sensor Carrying Tube, Quick Start Guide, and 1 Training Session (USA Only)

MR Diffusion Perfusion Mismatch V1.0 is an automatic calculation tool indicated for use in radiology. The device is an image processing software allowing computation of parametric maps from (1) MR Diffusion-weighted imaging (DWI) and (2) MR Perfusion-weighted imaging (PWI) and extraction of volumes of interest based on numerical thresholds applied to the aforementioned maps. Computation of mismatch between extracted volumes is automatically provided. The device is intended to assist trained radiologists and surgeons in the imaging assessment workflow by extraction and communication of metrics from MR Diffusion-weighted imaging (DWI) and MR Perfusion-weighted imaging (PWI). The results of MR Diffusion Perfusion Mismatch V1.0 are intended to be used in conjunction with other patient information and, based on professional judgment, to assist the clinician in the medical imaging assessment. MR Diffusion Perfusion Mismatch V1.0 can be integrated and deployed through technical platforms.

CT Perfusion V1.0 is an automatic calculation tool indicated for use in radiology. The device is an image processing software allowing computation of parametric maps from CT Perfusion data and extraction of volumes of interest based on numerical thresholds applied to the aforementioned maps. Computation of mismatch between extracted volumes is automatically provided. The device is intended to be used by trained professionals with medical imaging education including but not limited to, physicians and medical technicians in the imaging assessment workflow by extraction and communication of metrics from CT Perfusion dataset. The results of CT Perfusion V1.0 are intended to be used in conjunction with other patient information and, based on professional judgment, to assist the clinician in the medical imaging assessment. Trained professionals are responsible for viewing the full set of native images per the standard of care. CT Perfusion V1.0 can be integrated and deployed through technical platforms.

Provides software applications used to process, display, analyze and manage nuclear medicine and other medical imaging data transferred from other workstation or acquisition stations. The Lung Lobe Quantification module in Hybrid3D introduces an efficient and automated workflow solution to compute 3D lobar anatomy from CT (with or without contrast). Functional images (SPECT V/Q, SUV SPECT, CT iodine maps, hyperpolarized xenon MRI, etc.) can also be include in the analysis to relate lobar anatomy to function.

Provides software applications used to process, display, analyze and manage nuclear medicine and other medical imaging data transferred from other workstation or acquisition stations. The Lung Lobe Quantification module in Hybrid3D introduces an efficient and automated workflow solution to compute 3D lobar anatomy from CT (with or without contrast). Functional images (SPECT V/Q, SUV SPECT, CT iodine maps, hyperpolarized xenon MRI, etc.) can also be include in the analysis to relate lobar anatomy to function. UDI = 00859873006073 applies to Hybrid 3D version 2.x and 3.x.

TumorSight Viz is an image processing system designed to assist in the visualization and analysis, of breast DCE-MRI studies. TumorSight Viz reads DICOM magnetic resonance images. TumorSight Viz processes and displays the results on the TumorSight Viz web application. Available features support: 1) Visualization (standard image viewing tools, MIPs, and reformats) 2) Analysis (registration, subtractions, kinetic curves, parametric image maps, segmentation and 3D volume rendering) 3) Communication and storage (DICOM import, retrieval, and study storage) The TumorSight Viz system consists of proprietary software developed by SimBioSys, Inc. hosted on a cloud-based platform and accessed on an off-the-shelf computer

Includes 2 VersaTek Cuffs, 1 VersaTek Wireless Unit with Battery Pack Holder and Belt, Power Supply and AC Cord, Line Filter, CONFORMat Clinical Software CD with CONFORMat and CONFORMat Dual Maps, Help File, PDF of System Manual and Wireless software features, Pre-configured wireless router, (2) 5330E Sensors, Li-Ion Battery Pack, Battery Pack Charger and Battery Pack Charger Power Supply, 6.5 ft. Mini USB Cable, (2) 4 ft. Cuff Cables, Elastic Take-Up Belt, Elastic Belt Extension, 2 Arm/Leg Straps, 2 Velcro Cable Ties, 2 Velcro Wrist/Ankle Bands, Sensor Carrying Tube, System Carrying Case, Quick Start Guide, and 1 Training Session (USA Only)

Includes 2 VersaTek Cuffs, 1 VersaTek Wireless/Datalogger Unit with Battery Pack Holder and Belt, Power Supply and AC Cord, Line Filter, CONFORMat Clinical Software CD with CONFORMat and CONFORMat Dual Maps, Help File, PDF of System Manual, Pre-configured wireless router, (2) 5330E Sensors, Formatted Memory Stick, Li-Ion Battery Pack, Battery Pack Charger and Battery Pack Charger Power Supply, 6.5 ft. Mini USB Cable, Trigger Switch, (2) 4 ft. Cuff Cables, Elastic Take-Up Belt, Elastic Belt Extension, 2 Arm/Leg Straps, 2 Velcro Cable Ties, 2 Velcro Wrist/Ankle Bands, Sensor Carrying Tube, System Carrying Case, Quick Start Guide, and 1 Training Session (USA Only)

Includes 2 VersaTek Cuffs, 1 VersaTek Datalogger Unit with Battery Pack Holder and Belt, Power Supply and AC Cord, Line Filter, CONFORMat Clinical Software CD with CONFORMat and CONFORMat Dual Maps, Help File, PDF of System Manual and Datalogger software features, (2) 5330E Sensors, Formatted Memory Stick, Li-Ion Battery Pack, Battery Pack Charger and Battery Pack Charger Power Supply, 6.5 ft. Mini USB Cable, Trigger Switch, (2) 4 ft. Cuff Cables, Elastic Take-Up Belt, Elastic Belt Extension, 2 Arm/Leg Straps, 2 Velcro Cable Ties, 2 Velcro Wrist/Ankle Bands, Sensor Carrying Tube, System Carrying Case, Quick Start Guide, and 1 Training Session (USA Only)

STAGE is a MR post-processing software medical device intended for use in the visualization of the brain. STAGE analyzes input data from MR imaging systems. STAGE runs within a VM environment on hardware that meets the minimum requirements. STAGE utilizes magnitude and phase data acquired with specific parameters to generate enhanced T1 weighted images, SWI images, susceptibility enhanced images, pseudo-susceptibility maps, true SWI images, MR angiography (MRA) images, simulated T2 images, simulated T2 FLAIR images, simulated dual inversion recovery (DIR) images, and maps of T1, R2*, and proton density (PD). CROWN, introduced in STAGE, reduces noise some of these outputs, enhancing SNR and/or reducing imaging time. STAGE is indicated for brain imaging. Maximum and minimum intensity projections of some of these outputs will also be provided. The STAGE outputs can be configured to match the conventional acquisition series in MR protocols (i.e. routine brain w/) in terms of contrast, orientation and resolution. STAGE should always be used in combination with at least one other conventional MR acquisition technique (e.g. T2 FLAIR). STAGE input data can be acquired within a range of collection parameters, within shorter echo acquisitions allowing for less susceptibility affects and higher anatomic signal at the air tissue interface or with longer echo times for higher susceptibility effects around blood products and iron sources.

The P200TE is a non-contact scanning laser ophthalmoscope and optical coherence tomographer intended for in-vivo viewing and digital imaging of posterior ocular structures, including the retina, retinal nerve fiber layer and optic disc. The P200TE is a non-contact scanning laser ophthalmoscope and optical coherence tomographer. It is intended for in-vivo viewing, digital imaging, and analysis of posterior ocular structures, including the retina, retinal nerve fiber layer, ganglion cell complex (GCC) and optic disc, under mydriatic and non-mydriatic conditions. It is indicated for producing high resolution, ultra-widefield, en face reflectance images, autofluorescence images, axial cross-sectional images, three-dimensional images, retinal layer boundary analysis, optic nerve head analysis and thickness maps. The P200TE is indicated for use as a device to aid in the detection, diagnosis, documentation and management of retinal health and diseases that manifest in the retina.

CT CoPilot is intended for use in automating post-acquisition quantitative analysis of CT images of the brain for patients aged 18 or older. CT CoPilot performs automatic reformatting, labeling and quantification of segmentable structures from a set of CT images of the brain. Output of the software provides these values as numerical volumes and images which have been annotated with graphical color overlays, with each color representing a specific brain structure. When CT imaging is performed more than once on a patient, the current data is co-registered to the most recently processed prior exam of the same patient, facilitating comparison between the studies using CT CoPilot. Voxel-by-voxel subtraction maps of the pixel density change in Hounsfield Units (HU) are generated in up to 3 dimensions between the current and most recent processed prior exam of the patient.

cNeuro cPET aids physicians in the evaluation of patient pathologies via assessment and quantification of PET brain scans. The software aids in the assessment of human brain PET scans enabling automated analysis through quantification of tracer uptake and comparison with the corresponding tracer uptake in normal subjects. The resulting quantification is presented using volumes of interest and voxel-based maps of the brain. cNeuro cPET allows the user to generate information regarding relative changes in PET-FDG glucose metabolism. cNeuro cPET additionally allows the user to generate information regarding relative changes in PET brain amyloid load between a subject’s images and a normal database, which may be the result of brain neurodegeneration. PET co-registration and fusion display capabilities with MRI allow PET findings to be related to brain anatomy. cNeuro cPET aids physicians in the image interpretation of PET studies conducted on patients being evaluated for cognitive impairment, or other causes of cognitive decline.

LiverMultiScan v5 (LMSv5) is indicated for use as a magnetic resonance diagnostic device software application for non-invasive liver evaluation that enables the generation, display and review of 2D magnetic resonance medical image data and pixel maps for MR relaxation times. LMSv5 is designed to utilize DICOM 3.0 compliant magnetic resonance image datasets, acquired from compatible MR Systems, to display the internal structure of the abdomen including the liver. Other physical parameters derived from the images may also be produced. LMSv5 provides several tools, such as automated liver segmentation and region of interest (ROI) placements, to be used for the assessment of selected regions of an image. Quantitative assessment of selected regions includes the determination of triglyceride fat fraction in the liver (PDFF), T2*, LIC (Liver Iron Concentration) and iron corrected T1 (cT1) measurements. These images and the physical parameters derived from the images, when interpreted by a trained clinician, yield information that may assist in diagnosis.

LiverMultiScan v5 (LMSv5) is indicated for use as a magnetic resonance diagnostic device software application for non-invasive liver evaluation that enables the generation, display and review of 2D magnetic resonance medical image data and pixel maps for MR relaxation times. LMSv5 is designed to utilize DICOM 3.0 compliant magnetic resonance image datasets, acquired from compatible MR Systems, to display the internal structure of the abdomen including the liver. Other physical parameters derived from the images may also be produced. LMSv5 provides several tools, such as automated liver segmentation and region of interest (ROI) placements, to be used for the assessment of selected regions of an image. Quantitative assessment of selected regions includes the determination of triglyceride fat fraction in the liver (PDFF), T2*, LIC (Liver Iron Concentration) and iron corrected T1 (cT1) measurements. These images and the physical parameters derived from the images, when interpreted by a trained clinician, yield information that may assist in diagnosis.

LiverMultiScan (LMSv4) is indicated for use as a magnetic resonance diagnostic device software application for non-invasive liver evaluation that enables the generation, display and review of 2D magnetic resonance medical image data and pixel maps for MR relaxation times. LiverMultiScan (LMSv4) is designed to utilize DICOM 3.0 compliant magnetic resonance image datasets, acquired from compatible MR Systems, to display the internal structure of the abdomen including the liver. Other physical parameters derived from the images may also be produced. LiverMultiScan (LMSv4) provides a number of tools, such as automated liver segmentation and region of interest (ROI) placements, to be used for the assessment of selected regions of an image. Quantitative assessment of selected regions includes the determination of triglyceride fat fraction in the liver (PDFF), T2* and iron-corrected T1 (cT1) measurements. T2* may optionally be computed using the DIXON or LMS MOST methodologies. These images and the physical parameters derived from the images, when interpreted by a trained clinician, yield information that may assist in diagnosis.

LiverMultiScan (LMSv3) is indicated for use as a magnetic resonance diagnostic device software application for non-invasive liver evaluation that enables the generation, display and review of 2D magnetic resonance medical image data and pixel maps for MR relaxation times. LiverMultiScan (LMSv3) is designed to utilize DICOM 3.0 compliant magnetic resonance image datasets, acquired from compatible MR Systems, to display the internal structure of the abdomen including the liver. Other physical parameters derived from the images may also be produced. LiverMultiScan (LMSv3) provides a number of tools, such as automated liver segmentation and region of interest (ROI) placements, to be used for the assessment of selected regions of an image. Quantitative assessment of selected regions includes the determination of triglyceride fat fraction in the liver (PDFF), T2* and iron-corrected T1 (cT1) measurements. PDFF may optionally be computed using the LMS IDEAL or three-point Dixon methodology. These images and the physical parameters derived from the images, when interpreted by a trained clinician, yield information that may assist in diagnosis.

LiverMultiScan (LMSv3) is indicated for use as a magnetic resonance diagnostic device software application for non-invasive liver evaluation that enables the generation, display and review of 2D magnetic resonance medical image data and pixel maps for MR relaxation times. LiverMultiScan (LMSv3) is designed to utilize DICOM 3.0 compliant magnetic resonance image datasets, acquired from compatible MR Systems, to display the internal structure of the abdomen including the liver. Other physical parameters derived from the images may also be produced. LiverMultiScan (LMSv3) provides a number of tools, such as automated liver segmentation and region of interest (ROI) placements, to be used for the assessment of selected regions of an image. Quantitative assessment of selected regions includes the determination of triglyceride fat fraction in the liver (PDFF), T2* and iron-corrected T1 (cT1) measurements. PDFF may optionally be computed using the LMS IDEAL or three-point Dixon methodology. These images and the physical parameters derived from the images, when interpreted by a trained clinician, yield information that may assist in diagnosis.

LiverMultiScan (LMSv3) is indicated for use as a magnetic resonance diagnostic device software application for non-invasive liver evaluation that enables the generation, display and review of 2D magnetic resonance medical image data and pixel maps for MR relaxation times. LiverMultiScan (LMSv3) is designed to utilize DICOM 3.0 compliant magnetic resonance image datasets, acquired from compatible MR Systems, to display the internal structure of the abdomen including the liver. Other physical parameters derived from the images may also be produced. LiverMultiScan (LMSv3) provides a number of tools, such as automated liver segmentation and region of interest (ROI) placements, to be used for the assessment of selected regions of an image. Quantitative assessment of selected regions includes the determination of triglyceride fat fraction in the liver (PDFF), T2* and iron-corrected T1 (cT1) measurements. PDFF may optionally be computed using the LMS IDEAL or three-point Dixon methodology. These images and the physical parameters derived from the images, when interpreted by a trained clinician, yield information that may assist in diagnosis.

LiverMultiScan (LMSv3) is indicated for use as a magnetic resonance diagnostic device software application for non-invasive liver evaluation that enables the generation, display and review of 2D magnetic resonance medical image data and pixel maps for MR relaxation times. LiverMultiScan (LMSv3) is designed to utilize DICOM 3.0 compliant magnetic resonance image datasets, acquired from compatible MR Systems, to display the internal structure of the abdomen including the liver. Other physical parameters derived from the images may also be produced. LiverMultiScan (LMSv3) provides a number of tools, such as automated liver segmentation and region of interest (ROI) placements, to be used for the assessment of selected regions of an image. Quantitative assessment of selected regions includes the determination of triglyceride fat fraction in the liver (PDFF), T2* and iron-corrected T1 (cT1) measurements. PDFF may optionally be computed using the LMS IDEAL or three-point Dixon methodology. These images and the physical parameters derived from the images, when interpreted by a trained clinician, yield information that may assist in diagnosis.