SEARCH RESULTS FOR: 外链资源优化程序方法👉TG@yuantou2048👈谷歌外链发布10万条(3732 results)
The Model 3024 Inspire II IPG contains electronics and a battery that are sealed inside a titanium case. The IPG is implanted subcutaneously below the clavicle in the upper chest, and connects to the stimulation lead and sensing lead.
The IPG has multiple programmable parameters that can be adjusted for a particular patient. Adjustments may be made to the sensing circuits to vary the timing of stimulation pulses and to the stimulation circuits to adjust the energy and duration of stimulation pulses. These adjustments provide the ability to optimize the opening of the upper airway. Based on typical settings from the STAR pivotal trial the longevity of the IPG’s battery will average 10 years.
The Model 3024 IPG was originally developed by Medtronic and utilizes the same platform as Medtronic’s Itrel® 3 IPG which is FDA approved for other neurostimulation therapies. Figure 9 provides a photograph of the Model 3024 IPG.
Inspire Medical Systems, Inc.
900-003-020
In Commercial Distribution
- 00855728005437 ()
3024
- Antiseizure/psychiatric-therapy vagus nerve implantable electrical stimulation system
The Model 3024 Inspire II IPG contains electronics and a battery that are sealed inside a titanium case. The IPG is implanted subcutaneously below the clavicle in the upper chest, and connects to the stimulation lead and sensing lead.
The IPG has multiple programmable parameters that can be adjusted for a particular patient. Adjustments may be made to the sensing circuits to vary the timing of stimulation pulses and to the stimulation circuits to adjust the energy and duration of stimulation pulses. These adjustments provide the ability to optimize the opening of the upper airway. Based on typical settings from the STAR pivotal trial the longevity of the IPG’s battery will average 10 years.
The Model 3024 IPG was originally developed by Medtronic and utilizes the same platform as Medtronic’s Itrel® 3 IPG which is FDA approved for other neurostimulation therapies. Figure 9 provides a photograph of the Model 3024 IPG.
Inspire Medical Systems, Inc.
900-003-015
In Commercial Distribution
- 00855728005024 ()
3024
- Antiseizure/psychiatric-therapy vagus nerve implantable electrical stimulation system
SIR-Y002 (1.8Gbq/3ml): SIR-Spheres Y-90 resin microspheres consist of biocompatible resin microspheres containing yttrium-90 with a size between 20 and 60 microns in diameter. Each vial contains 1.8 GBq of Y90 ± 10% (at the time of calibration) in a total of 3 cc water for injection.
Yttrium-90 is a high-energy pure beta-emitting isotope with no primary gamma emission. The maximum energy of the beta particles is 2.27MeV with a mean of 0.93MeV. The maximum range of emissions in tissue is 11mm with a mean of 2.5mm. This is a brachytherapy product considered to be a sealed source device. The yttrium-90 has a purity specification of 999,900 ppm at reference, at (or after) time of manufacture of SIR-Spheres microspheres. The half-life is 64.1 hours. In use requiring the isotope to decay to infinity, 94% of the radiation is delivered in 11 days leaving only background radiation with no therapeutic value.
SIR-Spheres microspheres themselves are a permanent implant. Each device is for single patient use.
SIRTEX MEDICAL PTY LTD
SIR-Y002
In Commercial Distribution
- 00850014612146 ()
- Total Volume: 3 Milliliter
- Manual brachytherapy source, permanent implant
SIR-Y001 (3Gbq/5ml): SIR-Spheres Y-90 resin microspheres consist of biocompatible resin microspheres containing yttrium-90 with a size between 20 and 60 microns in diameter. Each vial contains 3 GBq of Y90 ± 10% (at the time of calibration) in a total of 5 cc water for injection.
Yttrium-90 is a high-energy pure beta-emitting isotope with no primary gamma emission. The maximum energy of the beta particles is 2.27MeV with a mean of 0.93MeV. The maximum range of emissions in tissue is 11mm with a mean of 2.5mm. This is a brachytherapy product considered to be a sealed source device. The yttrium-90 has a purity specification of 999,900 ppm at reference, at (or after) time of manufacture of SIR-Spheres microspheres. The half-life is 64.1 hours. In use requiring the isotope to decay to infinity, 94% of the radiation is delivered in 11 days leaving only background radiation with no therapeutic value.
SIR-Spheres microspheres themselves are a permanent implant. Each device is for single patient use.
SIRTEX MEDICAL PTY LTD
SIR-Y001
- Manual brachytherapy source, permanent implant
SIR-Y001 (3Gbq/5ml): SIR-Spheres Y90 resin microspheres consist of biocompatible resin microspheres containing yttrium-90 with a size between 20 and 60 microns in diameter. Each vial contains 3 GBq of Y90 ± 10% (at the time of calibration) in a total of 5 cc water for injection.
Yttrium-90 is a high-energy pure beta-emitting isotope with no primary gamma emission. The maximum energy of the beta particles is 2.27MeV with a mean of 0.93MeV. The maximum range of emissions in tissue is 11mm with a mean of 2.5mm. This is a brachytherapy product considered to be a sealed source device. The yttrium-90 has a purity specification of 999,900 ppm at reference, at (or after) time of manufacture of SIR-Spheres microspheres. The half-life is 64.1 hours. In use requiring the isotope to decay to infinity, 94% of the radiation is delivered in 11 days leaving only background radiation with no therapeutic value.
SIR-Spheres microspheres themselves are a permanent implant. Each device is for single patient use.
SIRTEX MEDICAL PTY LTD
SIR-Y001
Not in Commercial Distribution
- M425SIRY0010 ()
- Total Volume: 5 Milliliter
- Manual brachytherapy source, permanent implant
The integrated Backup NO delivery system is a completely independent backup NO generating system that is separate from the main delivery system; it has its own NO generator and gas flow delivery system. Backup NO flow can be delivered to one of two different locations by using the System Selector switch located on the front panel of the LungFit PH system.
When the Selector Switch is turned to “Bagging System” position, the backup NO module turns on and delivers 1 L/min of 220 ppm of NO through a separate internal NO2 filter to the Bagging System connector on the front panel of the LungFit PH system. The Bagging System connector has two tubing fittings: one for connecting to an air/oxygen source through oxygen tubing or equivalent to provide an external flow of air/oxygen and the other to connect to a manual resuscitator for manually ventilating a patient. The 1 L/min NO flow from the backup NO module is added to this air/oxygen flow which dilutes the NO concentration down to therapeutic levels. Final NO concentration will depend on the amount of external flow added; for example, a flow of 10 L/min will provide 20 ppm of NO to the patient.
Beyond Air, Inc.
90005
In Commercial Distribution
- B882900051 ()
- B882900050 ()
- B882900052 ()
- Nitric oxide delivery unit, system-based
The On-X® Prosthetic Heart Valve is a bileaflet mechanical heart valve, which consists of an orifice housing and two leaflets. The orifice inflow area has a flared inlet designed to reduce flow turbulence, and the outflow rim consists of leaflet guards designed to protect the leaflets while in the closed position. The leaflets rotate around tabs located within the inner circumference of the orifice ring. In the closed position, each leaflet forms a nominal angle of 40º relative to the plane of the orifice. In the open position, the plane of each leaflet forms a nominal angle of 90deg relative to the plane of the orifice. The leaflets have a travel arc of 50deg to the closed position.
The orifice, or housing, is composed of a graphite substrate coated with On-X® Carbon, a pure unalloyed form of pyrolytic carbon. The leaflets consist of On-X® Carbon deposited on a graphite substrate, which is impregnated with 10 weight% tungsten to provide radiopacity.
The sewing cuff is constructed of polytetrafluoroethylene (PTFE) fabric mounted on the orifice using titanium retaining rings and 5-0 suture material. This form of sewing cuff attachment to the orifice allows for rotation of the sewing cuff in situ during implantation. Orientation reference marks are provided on the sewing cuff for valve orientation.
The On-X® Prosthetic Heart Valve is available in 3 aortic and 2 mitral sewing cuff configurations. Aortic configurations are available in sizes 19, 21, 23, 25, and 27/29 mm. The standard mitral cuff is available in sizes 23, 25, 27/29 and 31/33, while the Conform-X® mitral cuff is available in size 25/33 only.
Further detail for the On-X prosthetic heart valve is described in the Summary of Safety and Effectiveness documents for the On-X heart valves: http://www.accessdata.fda.gov/cdrh_docs/pdf/P000037b.pdf (aortic), and http://www.accessdata.fda.gov/cdrh_docs/pdf/P000037S001b.pdf (mitral).
ON-X LIFE TECHNOLOGIES, INC.
ONXANE-27/29
In Commercial Distribution
- 00851788001686 ()
- Outer Diameter: 29 Millimeter
- Aortic bi-leaflet mechanical heart valve prosthesis
The On-X® Prosthetic Heart Valve is a bileaflet mechanical heart valve, which consists of an orifice housing and two leaflets. The orifice inflow area has a flared inlet designed to reduce flow turbulence, and the outflow rim consists of leaflet guards designed to protect the leaflets while in the closed position. The leaflets rotate around tabs located within the inner circumference of the orifice ring. In the closed position, each leaflet forms a nominal angle of 40º relative to the plane of the orifice. In the open position, the plane of each leaflet forms a nominal angle of 90deg relative to the plane of the orifice. The leaflets have a travel arc of 50deg to the closed position.
The orifice, or housing, is composed of a graphite substrate coated with On-X® Carbon, a pure unalloyed form of pyrolytic carbon. The leaflets consist of On-X® Carbon deposited on a graphite substrate, which is impregnated with 10 weight% tungsten to provide radiopacity.
The sewing cuff is constructed of polytetrafluoroethylene (PTFE) fabric mounted on the orifice using titanium retaining rings and 5-0 suture material. This form of sewing cuff attachment to the orifice allows for rotation of the sewing cuff in situ during implantation. Orientation reference marks are provided on the sewing cuff for valve orientation.
The On-X® Prosthetic Heart Valve is available in 3 aortic and 2 mitral sewing cuff configurations. Aortic configurations are available in sizes 19, 21, 23, 25, and 27/29 mm. The standard mitral cuff is available in sizes 23, 25, 27/29 and 31/33, while the Conform-X® mitral cuff is available in size 25/33 only.
Further detail for the On-X prosthetic heart valve is described in the Summary of Safety and Effectiveness documents for the On-X heart valves: http://www.accessdata.fda.gov/cdrh_docs/pdf/P000037b.pdf (aortic), and http://www.accessdata.fda.gov/cdrh_docs/pdf/P000037S001b.pdf (mitral).
ON-X LIFE TECHNOLOGIES, INC.
ONXANE-25
In Commercial Distribution
- 00851788001679 ()
- Outer Diameter: 25 Millimeter
- Aortic bi-leaflet mechanical heart valve prosthesis
The On-X® Prosthetic Heart Valve is a bileaflet mechanical heart valve, which consists of an orifice housing and two leaflets. The orifice inflow area has a flared inlet designed to reduce flow turbulence, and the outflow rim consists of leaflet guards designed to protect the leaflets while in the closed position. The leaflets rotate around tabs located within the inner circumference of the orifice ring. In the closed position, each leaflet forms a nominal angle of 40º relative to the plane of the orifice. In the open position, the plane of each leaflet forms a nominal angle of 90deg relative to the plane of the orifice. The leaflets have a travel arc of 50deg to the closed position.
The orifice, or housing, is composed of a graphite substrate coated with On-X® Carbon, a pure unalloyed form of pyrolytic carbon. The leaflets consist of On-X® Carbon deposited on a graphite substrate, which is impregnated with 10 weight% tungsten to provide radiopacity.
The sewing cuff is constructed of polytetrafluoroethylene (PTFE) fabric mounted on the orifice using titanium retaining rings and 5-0 suture material. This form of sewing cuff attachment to the orifice allows for rotation of the sewing cuff in situ during implantation. Orientation reference marks are provided on the sewing cuff for valve orientation.
The On-X® Prosthetic Heart Valve is available in 3 aortic and 2 mitral sewing cuff configurations. Aortic configurations are available in sizes 19, 21, 23, 25, and 27/29 mm. The standard mitral cuff is available in sizes 23, 25, 27/29 and 31/33, while the Conform-X® mitral cuff is available in size 25/33 only.
Further detail for the On-X prosthetic heart valve is described in the Summary of Safety and Effectiveness documents for the On-X heart valves: http://www.accessdata.fda.gov/cdrh_docs/pdf/P000037b.pdf (aortic), and http://www.accessdata.fda.gov/cdrh_docs/pdf/P000037S001b.pdf (mitral).
ON-X LIFE TECHNOLOGIES, INC.
ONXANE-23
In Commercial Distribution
- 00851788001662 ()
- Outer Diameter: 23 Millimeter
- Aortic bi-leaflet mechanical heart valve prosthesis
The On-X® Prosthetic Heart Valve is a bileaflet mechanical heart valve, which consists of an orifice housing and two leaflets. The orifice inflow area has a flared inlet designed to reduce flow turbulence, and the outflow rim consists of leaflet guards designed to protect the leaflets while in the closed position. The leaflets rotate around tabs located within the inner circumference of the orifice ring. In the closed position, each leaflet forms a nominal angle of 40º relative to the plane of the orifice. In the open position, the plane of each leaflet forms a nominal angle of 90deg relative to the plane of the orifice. The leaflets have a travel arc of 50deg to the closed position.
The orifice, or housing, is composed of a graphite substrate coated with On-X® Carbon, a pure unalloyed form of pyrolytic carbon. The leaflets consist of On-X® Carbon deposited on a graphite substrate, which is impregnated with 10 weight% tungsten to provide radiopacity.
The sewing cuff is constructed of polytetrafluoroethylene (PTFE) fabric mounted on the orifice using titanium retaining rings and 5-0 suture material. This form of sewing cuff attachment to the orifice allows for rotation of the sewing cuff in situ during implantation. Orientation reference marks are provided on the sewing cuff for valve orientation.
The On-X® Prosthetic Heart Valve is available in 3 aortic and 2 mitral sewing cuff configurations. Aortic configurations are available in sizes 19, 21, 23, 25, and 27/29 mm. The standard mitral cuff is available in sizes 23, 25, 27/29 and 31/33, while the Conform-X® mitral cuff is available in size 25/33 only.
Further detail for the On-X prosthetic heart valve is described in the Summary of Safety and Effectiveness documents for the On-X heart valves: http://www.accessdata.fda.gov/cdrh_docs/pdf/P000037b.pdf (aortic), and http://www.accessdata.fda.gov/cdrh_docs/pdf/P000037S001b.pdf (mitral).
ON-X LIFE TECHNOLOGIES, INC.
ONXANE-21
In Commercial Distribution
- 00851788001655 ()
- Outer Diameter: 21 Millimeter
- Aortic bi-leaflet mechanical heart valve prosthesis